\ | / \ | / \|/ \|/ -- -->>>>>>-- -- c i f 2 c i f ...... CIF COPY PROGRAM /|\ /|\ / | \ / | \ Version 1.0.1 7 April 2005 cif2cif is a fortran program using CIFtbx2 to copy a CIF on standard ------- input to an equivalent CIF on standard output, while checking data names against dictionaries and reformating numbers with esd's to conform to the rule of 19. A request list may be specified cif2cif by Copyright © 1997, 1998, 2000, 2005 Herbert J. Bernstein (firstname.lastname@example.org) Bernstein + Sons 5 Brewster Lane Bellport, NY 11713, U.S.A. based on suggestions by Sydney R. Hall (email@example.com) Crystallography Centre University of Western Australia Nedlands 6009, AUSTRALIA with the request list handling suggested by the program QUASAR by Sydney R. Hall and Rolf Sievers (firstname.lastname@example.org) Institut fuer Anorganische-Chemisches der Universitaet Gerhard-Domagk-Str. Bonn, GERMANY
In order to ensure continuing availability of source code and documentation cif2cif and its documentation are subject to copyright. This does not prevent you from using the program, from making copies and changes, but prevents the creation of "closed source" versions out of the open source versions. See NOTICE.
Science is best served when the tools we use are fully understood by those who wield those tools and by those who make used of results obtained with those tools. When a scientific tool exists as software, access to source code is an important element in achieving full understanding of that tool. As our field evolves and new versions of software are required, access to source allows us to adapt our tools quickly and effectively.
In the early days of software development, most scientific software source code was freely and openly shared with a minimum of formalities. These days, it appears that carefully drawn legal documents are necessary to protect free access to the source code of scientific software. We are all deeply indebted to Richard Stallman for showing us how a creative combination of copyrights and seemingly restrictive licenses could give us truly unfettered freedom to use programs, to read their source code and to develop new versions. The GNU project, and the Linux project have shown that an open source approach works. We use the GNU General Public License (the "GPL") for our program starting with the release of CIFtbx3. Older versions use the license from OpenRasmol. The OpenRasMol conditions for use have correctly been called "GPL-like".
If you are a user of this program, you will find that the copyrights and notices ask little more of you than that you avoid mistakes by others by keeping the notices with copies, display scientific integrity by citing your sources properly and treating this like other shared scientific developments by not inferring a warranty. If you are a software developer and wish to incorporate what you find here into new code, or to pick up bits and pieces and used them in another context, the situation becomes more complex. Read the copyrights and notices carefully. You will find that they are "infectious". Whatever you make from our Open Source code must itself be offered as Open Source code. In addition, in order to allow users to understand what has changed and to ensure orderly development you have to describe your changes.
cif2cif reads the input CIF from the standard input device (normally device 5). An optional STAR data name dictionary (in DDL ) is opened. A reformatted copy of the input CIF is written to standard output (device 6). Messages are output to the standard error device (normally device 0). Note that the PARAMETER 'MAXBUF' should contain the maximum number of char- acters contained on a single text line. The default value is 2048.
In a unix-like environment, the program is run as:
cif2cif [-i input_cif] [-o output_cif] [-d dictionary] [-c catck] \ [-a aliaso_] [-e esdlim_] [-f command_file] [-g guess_type] \ [-m maxline] [-p prefix] [-q request_list] [-t tabl_] \ [-u unfold] [-w wrap] [input_cif [output_cif [dictionary [request_list]]]] where: input_cif defaults to $CIF2CIF_INPUT_CIF or stdin output_cif defaults to $CIF2CIF_OUTPUT_CIF or stdout dictionary defaults to $CIF2CIF_CHECK_DICTIONARY multiple dictionaries may be specified request_list defaults to $CIF2CIF_REQUEST_LIST input_cif of "-" is stdin, output_cif of "-" is stdout request_list of "-" is stdin -a has values of t or 1 or y vs. f or 0 or n, -c has values of t or 1 or y vs. f or 0 or n, -e has integer values (e.g. 9, 19(default) or 29), -g has values of t, 1 or y vs. f, 0 or n (default t), -m has values from 80 to 2048 for a maximum line width -p has a string value in which "_" is replaced by blank, -t has values of t, 1 or y vs. f, 0 or n (default f), -u has values of t, 1 or y vs. f, 0 or n (default f), -w has values of 0 for no wrap or a column to wrap on
The program can reformat CIFs with long lines to CIFs with shorter line by use of the '-w wrap' option, and can reformat CIFs that have been wrapped to a short line length to a longer line length with the '-u y' option. Numbers with standard uncertainties can be reformatted to different rules (e.g. from rule of 9 to rule of 29), provided the type of the data name is known to be numeric or can be guessed from context. The guessing of types for data names not specified in a dictionary can be suppressed by use of the '-g n' option.
The extraction of selected fields using a request list is supported by the '-q request_list' option. If a data name is requested that does not appear in the input CIF, a dummy entry for the requested name will be placed in the output CIF.
1.0. Before you try to install this version of cif2cif
*** ========================================================== *** *** ========================================================== *** *** ==>>> You must have ciftbx version 3.0.0 or greater <<<== *** *** ==>>> installed in a directory named ciftbx.src. <<<== *** *** ==>>> The scripts mkdecompln and rmdecompln, which <<<== *** *** ==>>> come with ciftbx, must be installed in the <<<== *** *** ==>>> top level directory and executable. <<<== *** *** ==>>> To test cif2cif, you must have a compressed <<<== *** *** ==>>> copy of the dictionary cif_mm.dic in a <<<== *** *** ==>>> directory named dictionaries. <<<== *** *** ========================================================== *** *** ========================================================== ***The directory structure within which you will work is
top level directory ------------------- | | ------------------------------ | | | dictionaries ciftbx.src cif2cif.src ------------ ---------- -----------
You may have acquired this package in one of several forms. The most likely are as a "C-shell Archive," a "Shell Archive", or as separate files. The idea is to get to separate files, all in the same directory, named cif2cif.src, parallel to the directory ciftbx.src, but let's start with the possibility that you got the package as one big file, i.e. in one of the archive file formats. Place the archive in the top level directory.
*** ========================================================== *** *** ========================================================== *** *** ==>>> The files in this kit will unpack into a <<<== *** *** ==>>> directory named cif2cif.src. It is a good idea<<<== *** *** ==>>> to save the current contents of cif2cif.src <<<== *** *** ==>>> and then to make the directory empty <<<== *** *** ========================================================== *** *** ========================================================== ***If you are on a machine which does not provide a unix-like shell, you will need to take apart the archive by hand using a text editor. We'll get to that in a moment.
1.1. ON A UNIX MACHINE
If you have the shell archive on a unix machine, follow the instructions at the front of the archive, i.e. save the uncompressed archive file as "file", then, if the archive is a "Shell Archive" execute "sh file". If the archive is a "C-Shell Archive" execute "csh file".
1.2. IF YOU DON'T HAVE UNIX
If sh or csh are not available, then it is best to start with the "C-Shell Archive" and do the steps that follow. If you must use the "Shell Archive" you should be aware that the lines you want to extract have been prefixed with "X", while most of the lines you want to discard have not. For a "C-Shell Archive" such prefixes are rare and the file is easier to read. Assume you have a "C-Shell Archive".
Use your editor to separate the different parts of the file into individual files in your workspace. Each part starts with a lot of unixisms, then several blank lines and then two lines which identify the file, and most importantly, contain the text "CUT_HERE_CUT_HERE_CUT_HERE" You can look at the line before and the line after to see if you are at the head or tail of a file. Use your editor to search for the "CUT_HERE" lines. Each part is carefully labeled and indicates the recommended filename for the separated file. On some machines these filenames may need to be altered to suit the OS or compiler.
The partitions are as follows:
part filename description 1 gpl.txt GPL (GNU General Public License) 2 NOTICE Notices 3 cif2cif.src/README.cif2cif additional information on cif2cif 4 cif2cif.src/MANIFEST a list of files in the kit 5 cif2cif.src/Makefile a preliminary control file for make 6 cif2cif.src/4ins.cif example mmcif file used to test cif2cif 7 cif2cif.src/4ins.out example mmcif output from test of cif2cif 8 cif2cif.src/4ins.prt example mmcif list file from test of cif2cif 9 cif2cif.src/4insuw.out example mmcif unwrapped long output 10 cif2cif.src/4insuw.prt example mmcif list unwrapped long output 11 cif2cif.src/4insw.out example mmcif wrapped output 12 cif2cif.src/4insw.prt example mmcif list wrapped output 13 cif2cif.src/cif2cif.cmn cif2cif common block 14 cif2cif.src/cif2cif.f cif2cif fortran source 15 cif2cif.src/qtest.cif quasar mode test input cif 16 cif2cif.src/qtest.out quasar mode test output cif 17 cif2cif.src/qtest.req quasar mode test request file 18 cif2cif.src/qtest.prt example cif file used to test cif2cif 19 cif2cif.src/xtalt2.cif example cif file used to test cif2cif 20 cif2cif.src/xtalt2.out example cif output from test of cif2cif 21 cif2cif.src/xte29.out example cif output from test of cif2cif 22 cif2cif.src/xttne9.out example cif output from test of cif2cif
For non-UNIX-like environments, you will have to provide replacements for iargc, getarg and getenv. The following are reasonable possibilities:
integer function iargc(dummy) iargc=0 return end subroutine getarg(narg,string) integer narg character*(*) string string=char(0) return end subroutine getenv(evar,string) character*(*) evar,string string=char(0) if(evar.eq."CIF2CIF_INPUT_CIF") * string='INPCIF.CIF'//char(0) if(evar.eq."CIF2CIF_OUTPUT_CIF") * string='OUTCIF.CIF'//char(0) if(evar.eq."CIF2CIF_CHECK_DICTIONARY") * string='CIF_CORE.DIC'//char(0) return endThis combination of substitute routines would "wire-in" cif2cif to read its input cif from a file named INPCIF.CIF, write its output cif to a file named OUTCIF.CIF, and check names against CIF_CORE.DIC
dictionary input input on device 2 Reformatted CIF output on device 6 ('stdout') Input CIF input on device 2, if a file, 5 if 'stdin' Message device output on device 0 ('stderr') Direct access in/out on device 3
xtalt2.cif provides good test cases for the conversion of esd's. The command
cif2cif -t y < xtalt2.cif > xtalt2.newensures that all esd's follow the rule of 19, while
cif2cif -t y -e 29 < xtalt2.cif > xte29.newconverts esd's to the rule of 29. The difference between the â two rules is that for the rule of 19, all esd's lie between 2 and 19, so that an esd of (1) has to be converted to (10), while for the rule of 29, all esd's lie between 3 and 29, so that an esd of (2) also has to be converted, in this case to (20). The option "-t y" tidies the output to tab stops.
One last test with this file is to use the command
cif2cif -e 9 < xtalt2.cif > xttne9.newto copy the original cif spacing and to use the rule of 9 on esd's
4ins.cif has many comments, text fields and dense loops. The test in the Makefile tests handling of these items and adds the additional complication of processing a prefix ".._" with the command
cif2cif -t y -p .._ < 4ins.cif > 4ins.newThe output spacing is controlled by the program.
Two additional tests are provided. The command
cif2cif -gn -u -m2048 -i 4ins.cif > 4insuw.newunwraps the 80 character version of 4ins.cif to the maximum line length, not using a dictionary and suppressing the guessing of numeric data types. This is followed by a pass wrapping the resulting cif to 120 columns with the command
cif2cif -d cif_mm.dic -w 120 -i 4insuw.new > 4insw.new
The quasar mode may be tested by the command
cif2cif -i qtest.cif -o qtest.new -q qtest.req
Version 1.0.0 (2 April 2005) added support for line folding and unfolding using -w (for wrap), -u (for unfold) and -m (for maximum line length). Work supported in part by the International Union of Crystallography.
Version 0.1.0 (8 July 2000) fixed a parse error in the command line and an error in the comments.
Version 0.0.9 (30 May 2000) changed the variable named tab to xxtab to avoid a conflict.
Version 0.0.8 (2 April 1998) added code to preserve the distinction between esds which are numerically identical but presented with varying numbers of trailing zeros. To enable this feature, the command line argument -e must be given a negative value large enough to span the desired range, e.g. "-e -19" to allow both .6870(10) and .687(1) to be handled. The variables esddig_ and pesddig_ introduced with ciftbx 2.6 are used. A bug in the preserving leading zeros of unlooped numeric values was also fixed.
Version 0.0.7 (7 August 1997) added support for quasar-style request lists. In addition, a special form of request for "data_which_contains:" will find the data block which contains at least one of the following tags.
Version 0.0.6 (12 May 1997) added support of negative values of esdlim_, indicating a range of esd's from 1 to -esdlim_. The practical use of this change is to use the command line parameter -e-9999 to copy most esds unchanged. The new ciftbx variables decp_, pdecp_, lzero_ and plzero_ are used internally to copy decimal points and leading zeros more faithfully. The 4ins example has been updated to use cif_mm.dic (0.9.01). The command-line option "-c catck" was added. The default is not to check categories.
Version 0.0.5 (2 December 96) adds support for copying of global_ sections and corrects a typo in the error message issued when the output CIF cannot be opened.
Version 0.0.4 (24 September 96) adapts to the 'ciftbx.cmn' and 'ciftbx.sys' reorganization in ciftbx 2.5.1.
Version 0.0.3 (24 July 96) used ciftbx 2.5.0 to preserve tabs, fixed a case in which string quoted in the input cif may not have been quoted in the output cif, preserved more white space, and copied comments within loop headers. The lateral position of "loop_" is preserved. A bug in copying final comments which caused the a comment to be duplicated or some final comments to be lost was fixed.
Version 0.0.2 (24 June 96) changed the default for -t to n instead of y, and used ciftbx 2.4.6 to increase the faithfulness of the copy.