[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Reply to: [list | sender only]
[SA_scat] Wim Bras's reply
- To: [email protected]
- Subject: [SA_scat] Wim Bras's reply
- From: JDB Science LLC <[email protected]>
- Date: Tue, 1 Jun 2004 10:42:23 -0400
I did not find this in the archive, so I have reposted it on the theory that I may have hit the wrong button when handling a moderator request. From: "Wim Bras" <[email protected]> Date: May 31, 2004 8:20:03 AM EDT To: "Discussion list for the Small-Angle Scattering community" <[email protected]> Subject: RE: [SA_scat] Windows for SAXS cryostat Reply-To: <[email protected]> Laurence, avoid Beryllium. The grain boundaries in it give a high background. IF1 Beryllium from Brush-Wellmann might be good although I don't have any experience with it. (Henderson J.Appl. Cryst. 28, 1995,820) Kapton is a reasonable choice. Wim W. Bras DUBBLE CRG @ ESRF BP 220 F-38043 Grenoble Cedex, France ++ 33 (0)476882351 tel ++ 33 (0)476882412 FAX _______________________________________________ sa_scat mailing list [email protected] http://scripts.iucr.org/mailman/listinfo/sa_scat
Reply to: [list | sender only]
- Prev by Date: Re: [SA_scat] Windows for SAXS cryostat
- Next by Date: RE: [SA_scat] Windows for SAXS cryostat
- Prev by thread: RE: [SA_scat] Mica discs
- Next by thread: [SA_scat] Windows for SAXS cryostat
- Index(es):