Crystallography around the world: Canada

National associations or societies

 American Crystallographic Association
 Canadian National Committee for Crystallography

Canada

National Committee for Crystallography web page 

Category III

Adhering Body

National Research Council

Daria Sochinskaia (), International Programme Officer, International Relations Office, National Research Council Canada / Government of Canada. 1200 Montreal Road, Building M-50, Room 317, Ottawa ON K1A 0R6, Canada (Email: Daria.Sochinskaia@nrc-cnrc.gc.ca)

Secretary of National Committee

M. FODJE, Canadian Lightsource, 44 Innovation Boulevard, Saskatoon, SK, S7N 2V3, Canada

National Committee

L. DAWE(Chair)
G. AUDETTE (Vice-Chair)
S. ANDRES (Canadian Representative to the ACA)
M. BROWN
D. BRYCE
A. GUARNE
T. FRISCIC (Past-Chair)
B. PATRICK (Treasurer)
V.N. VUKOTIC
C.F. MATTA
B. MORENO

This information last updated: 03 Mar 2023

The following crystallographers in Canada are registered in the World Directory of Crystallographers.

(IUCr) crystallographers in Canada

269 entries found

  • Achenbach, Professor Dr Sven Professor of Electrical Engineering. Electrical and Computer Engineering, University of Saskatchewan, 57 Campus Drive, Saskatchewan, S7N 5A9, Saskatoon, Canada.
  • Alonzo, Mr Diego PhD Student. Biochemistry, McGill University, 3649 Promenade Sir William Osler, Room 457, Quebec, H3G 0B1, Montreal, Canada.
  • Armstrong, Mr Nathan Ph.D. candidate. Department of Physics & Astronomy, A. N. Bourns Science Building - 241, McMaster University, 1280 Main Street West, Hamilton, Ontario, L8S 4M1.
  • Assaaoudi, Dr Hassane Postdoctoral Fellow. Otto Maas Chemistry Bld., McGill University, 801 Sherbrooke Street West, Quebec, H3A 2K6, Montreal, Canada.
  • Audette, Dr Gerald F. Professor. Dept. of Chemistry, 327C Life Sciences Bldg., York University, 4700 Keele St., Toronto, ON, M3J1P3, Canada.
  • Ayoub, Miss Ghada Student. 3440 Durocher St. apt 410., Montreal, QC, Canada, Postal code: H2X 2E2.
  • Ball, Mr Neil Allen X-Ray Lab Manager. Geological Sciences, Microprobe Lab, University of Manitoba, 125 Dysart Road, MB, R3T 2N2, Winnipeg, Canada.
  • Balogh, Dr Levente Assistant Professor. Mechanical and Materials Engineering, Queen's University, Nicol Hall, Mechanical and Materials Engineering, Queen's University, ON, K7L 3N6, Kingston, Canada.
  • Barbier, Dr Jacques Professor of Chemistry. Dept of Chemistry, McMaster University, Hamilton, Ont. L8S 4M1, Canada.
  • Barrette-Ng, Dr Isabelle Instructor of biochemistry and genetics. Integrative Biology, University of Windsor, -, Ontario, -, Windsor, Canada.
  • Barrington Leigh, Dr John retired physicist. t3i, 9820 85 Ave, Alta, T6E 2J6, Edmonton, Canada.
  • Batchelor, Dr Raymond John R.J. Batchelor, Dept of Chemistry, Simon Fraser University, 8888 University Way, Burnaby, BC V5A 1S6, Canada.
  • Beauchamp, Professor André Professor Emeritus. Dépt. de Chimie, Université de Montréal, CP 6128, Succ. Centre-ville, Montréal QC, Canada H3C 3J7.
  • Bélanger-Gariépy, Francine research assistant. Dépt. de Chimie, Université de Montréal, CP 6128, Succ. A, Montréal, Qué. H3C 3J7, Canada.
  • Bensimon, Dr Corinne assistant professor. Chemistry Dept, Ottawa University, Ottawa, Ont. K1N 6N5, Canada.
  • Berghuis, Dr Albert Professor. Biochemistry, McGill University, 3649 Promenade Sir William Osler, Bellini Pavilion, Room 466, QC, H3G 0B1, Montreal, Canada.
  • Bergmann, Dr Ernst Michael Business Manager Biomedical Engineering. Biomedical Engineering, University of Alberta, 1060 Research Transition Facility, Alta, T6G 2V2, Edmonton, Canada.
  • Beyerlein, Dr Kenneth Roy Assistant Professor. Énergie Matériaux Télécommunications Center, Institut National de la Recherche Scientifique, 1650 blvd Lionel Boulet, Quebec, J3X 1P7, Varennes, Canada.
  • Bian, Dr Chuanbing Structural biology. Biochemistry, 11-463 Platt's Ln, ON, N6G3H2, London, Canada.
  • Bieringer, Dr Mario Associate Professor. Chemistry, University of Manitoba, Parker Building, Manitoba, R3T 2N2, Winnipeg, Canada.
  • Bird, Professor Peter Hans professor (retired). Dept of Chemistry and Biochemistry, Concordia University, 1455 Blvd de Maisonneuve, Montréal, Qc. H3G 1M8, Canada.
  • Birnbaum, Dr Karin Bjåmer retired. IMSB, National Research Council of Canada, 1200 Montreal Rd, K1A 0R6, Ottawa, Canada.
  • Blais, Dr Jean-Simon Chemist. Chemistry, KABS Laboratories, 4500 Tonnancour, Qc, Canada, J3y-9G2, Longueuil (St-Hubert), Canada.
  • Bochkarev, Dr Alexey V. Principal Investigator. MaRS Centre, South Tower, Structural Genomics Consortium, 101 College St., Suite 700, M5G 1L7, Toronto, Canada.
  • Boeré, Professor René Theodoor Professor of Chemistry. René T. Boeré, Department of Chemistry and Biochemistry, The University of Lethbridge, Lethbridge, AB Canada T1K3M4.
  • Bottomley, Professor Frank Professor emeritus. Dept of Chemistry, U. of New Brunswick, PO Box 4400, NB, E3B 5A3, Fredericton, Canada.
  • Bowyer, Dr Alexandra Post Doctoral Fellow. Structural Biology, NRC Biotechnology Research Institute, 6100 Royalmount Avenue, Quebec, H4P 2R2, Montreal, Canada.
  • Boyle, Dr Paul D. X-ray Facility Staff. Department of Chemistry, Western University, -, Ontario, N6A 5B7, London, Canada.
  • Brandon, Dr James Kenneth associate professor, retired. Physics Dept, University of Waterloo, Waterloo, Ont. N2L 3G1, Canada.
  • Brayer, Professor Gary David Professor. 9100 Ash Street, Richmond, BC, Canada, V7A 2T6.
  • Breton, Dr Rock researcher. Centre de Recherches du CHUL, 2705 bd. Laurier, Ste-Foy, Qué. G1V 4G2, Canada.
  • Bridson, Dr John N. associate professor, retired. Chemistry Department, Memorial University, -, Nfld, A1B 3X7, St Johns, Canada.
  • Brisse, Dr François professor emeritus. Département de Chimie, Université de Montréal, CP 6128, Succ. A, Montréal, Qué. H3C 3J7, Canada.
  • Britten, Dr James Francis X-ray manager and Scientific Director. Dept of Chemistry and Chemical Biology, McMaster University, ABB-B154, Hamilton, Ontario, Canada L8S 4M1.
  • Brown, Dr Ian David professor emeritus. Brockhouse Institute for Materials Research, McMaster University, Hamilton, Ont. L8S 4M1, Canada.
  • Bryce, Professor David Professor of Chemistry. Chemistry and Biomolecular Sciences, University of Ottawa, 10 Marie Curie Private, Ontario, K1N6N5, Ottawa, Canada.
  • Bui, Mr Tam Graduate Student. Biochemistry, Western University, 1151 Richmond St., ON, N6A 3K7, London, Canada.
  • Bushnell, Professor Gordon William Professor Emeritus. Dept of Chemistry, University of Victoria, PO Box 3055, Victoria, BC V8W 3P6, Canada.
  • Caldwell, Mr Shane PhD Candidate. Biochemistry, McGill University, 3649 Promenade Sir William Osler Room 470, QC, H3G0B1, Montreal, Canada.
  • Camerman, Dr Norman professor. Dept of Biochemistry, University of Toronto, Toronto, Ont. M5S 1A8, Canada.
  • Cameron, Professor Theodore Stanley professor. Dept of Chemistry, Dalhousie University, Halifax, NS B3H 4J3, Canada.
  • Campbell, Dr Robert Laurence Senior Research Associate/Adjunct Assistant Professor. Department of Biomedical and Molecular Sciences, Botterell Hall, Rm 644, Queen's University, Kingston, ON K7L 3N6, Canada.
  • Charland, Dr Jean-Pierre research scientist. Department of Natural Resources Canada, CANMET Energy Technology Centre, BCC Bldg 3, 1, Haanel Drive, Ottawa, Ontario K1A 1M1, Canada.
  • Chenite, Dr Abdellatif Researcher. OligoMedic, 500 Boul. Cartier W, Montreal, H7V5B7, Laval, Canada.
  • Chirgadze, Dr Nickolay Y. Scientist. Campbell Family Cancer Research Institute, Ontario Cancer Institute, 200 Elizabeth Street, Ontario, M5G 2C4, Toronto, Canada.
  • Chittori, Dr Sagar Structural Biology Researcher. University of British Columbia, 3402-2215 Wesbrook Mall, BC, V6T 1Z3, Vancouver, Canada.
  • Christendat, Professor Dinesh Associate Professor. CSB, University of Toronto, Willcocks, m5s 3b2, Toronto, Canada.
  • Ciulavu, Magda Cristina Research assistant. Husky Energy Inc, 707-8th Avenue WS, Alberta, -, Calgary, Canada.
  • Clark, Dr Malcolm John Roy environmental chemist. Commonwealth Scientific Limited, 336 Foul Bay Road, BC, V8S 4G7, Victoria, Canada.
  • Cobbledick, Dr Roger Retired. 309 Beechgrove Avenue, Ontario, K1Z 6R4, Ottawa, Canada.
  • Codding, Dr Penelope W. Professor of Chemistry. Chemistry, University of Victoria, PO Box 3065, Stn CSC, BC, V8W 3V6, Victoria, Canada.
  • Collins, Professor Malcolm F. Professor emeritus. Dept of Physics and Astronomy, McMaster University, Hamilton, Ont. L8S 4M1, Canada.
  • Conly, Mr Cuylar Student. Chemistry, University of Saskatchewan, 110 Science Place, Saskatchewan, S7N 0X2, Saskatoon, Canada.
  • Couchman, Mr Miles Student. 498 Rushton Road, ON, M6C2Y3, Toronto, Canada.
  • Coulombe, Mr René CEO. Crystallography, IniXium Inc, 500 boul Cartier ouest, suite 6001, Quebec, H7V 5B7, Laval, Canada.
  • Cygler, Dr Miroslaw (Mirek) Professor. Biochemistry, University of Saskatchewan, 107 Wiggins Road, Saskatchewan, S7N 5E5, Saskatoon, Canada.
  • Dabkowska, Dr Hanna A. research scientist. BIMR, McMaster University, 1280 Main Str West, Hamilton, Ont, L8S 4M1, Canada.
  • Dabkowski, Dr Antoni Research Scientist. Brockhouse Institute for Materials Research ABB 433, McMaster University, Hamilton, Ont. L8S 4M1, Canada.
  • Dawe, Dr Louise Associate Professor. Department of Chemistry and Biochemistry, Wilfrid Laurier University, 75 University Ave. W., Ontario, N2L 3C5, Waterloo, Canada.
  • Decken, Dr Andreas Associate Professor & Asst. Dean of Science. Chemistry, University of New Brunswick, 45222, NB, E3B 6E2, Fredericton, Canada.
  • Dénès, Professor Georges Professor. Chemistry and Biochemistry, Concordia University, Richard J. Renaud Science Complex, Quebec, H3G 1M8, Montreal, Canada.
  • Dong, Ms Zhaohui Ph.D. student. Department of Chemistry, University of Western Ontario, 1151 Richmond RD., Ontario, N6A 5B7, London, Canada.
  • Dragomir, Dr Mirela Researcher. Brockhouse Institute for Materials Research, McMaster University, 1280 Main Street West, Ontario, L8S 4M1, Hamilton, Canada.
  • Drake, Professor John E. Professor emeritus. Chemistry Dept, University of Windsor, -, Ont., N9B 3P4, Windsor, Canada.
  • Drouin, Marc X-ray crystallography services. Structural Chemistry Laboratory, Université de Sherbrooke, Sherbrooke, Qué. J1K 2R1, Canada.
  • Einstein, Professor Frederick W. B. Professor Emeritus. Dept of Chemistry, Simon Fraser University, Burnaby, BC V5A 1S6, Canada.
  • Enright, Dr Gary Senior Research Officer. Steacie Inst. for Molecular Science, National Research Council of Canada, Ottawa, Ont. K1A 0R6, Canada.
  • Ercit, Dr Timothy Scott Research Scientist - retired. Canadian Museum of Nature, Research Division, PO Box 3443, Stn D, Ottawa, Ont. K1P 6P4, Canada.
  • Evans, Dr R. James Researcher. Earth, Ocean, and Atmospheric Sciences, University of British Columbia, 2207 - 2020 Main Mall, BC, V6T 1Z4, Vancouver, Canada.
  • Evans, Dr Stephen Professor. Department of Biochemistry & Microbiology, University of Victoria, PO Box 3055, STN CSC, British Columbia, V8W 3PN, Victoria, Canada.
  • Farrar, Professor David H. Professor and administrator. McMaster University, -, Ontario, -, Hamilton, Canada.
  • Fethiere, Dr James staff scientist. IniXium, -, H3T 1J4, Montreal, Canada.
  • Fodje, Dr Michel Beamline Scientist. Canadian Lightsource, 44 Innovation Boulevard, SK, S7N 2V3, Saskatoon, Canada.
  • Fortier, Dr Suzanne professor. Dept of Chemistry, Queen's University, Kingston, Ont. K7L 3N6, Canada.
  • Fraser, Dr Marie Professor. Department of Biological Sciences, University of Calgary, 2500 University Dr. NW, Calgary, AB T2N 1N4, CANADA.
  • Friscic, Dr Tomislav Professor. Chemistry, McGill University, 801 Sherbrooke St. W, Quebec, H3A 0B8, Montreal, Canada.
  • Gagnon, Dr Jacinthe Specialist, Regulatory Affairs. Groupe Marcelle, -, -, Montreal, Canada.
  • Gandrath, Dr Dayaker Research associate. Chemistry, Mcgill University, 801 Sherbrooke St W, Quebec, H3A 0B8, Montreal, Canada.
  • Germann, Dr Luzia S. Chemist / Crystallographer. Department of Chemistry, McGill University, 801 Sherbrooke St W, Quebec, H3A 0B8, Montreal, Canada.
  • Gertsman, Dr Valery Senior Research Scientist. V.Y. Gertsman, MTL, 568 Booth Street, Ottawa, ON, K1A 0G1, Canada.
  • Ghukasyan, Mr Ara Student. 4 Bay Hill drive, L4K 1G9, Vaughan, Canada.
  • Gibbons, Dr Cyril Stephen Retired. Innovations and Partnerships Office, University of Toronto, 101 College Street Suite 320, Ontario, M5G 1L7, Toronto, Canada.
  • Glover, Professor Mark professor. Department of Biochemistry, University of Alberta, Department of Biochemistry, Alberta, t6g 2h7, Edmonton, Canada.
  • Gomery, Ms Kathryn PhD Student. Biochemistry, University of Victoria, Finnerty Road, BC, V8W 3P6, Victoria, Canada.
  • Gomez Gonzalez, Professor Ariel Scientific Project Manager and Adjunct Professor. Physics, University of Guelph, 50 Stone Road East, Ontario, N1G 2W1, Guelph, Canada.
  • Gosselin, Ms Catherine Student. Institut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, 3351, boul. des Forges, C.P. 500, Québec, G9A 5H7, Trois-Rivières, Canada.
  • Greedan, Dr John E. professor of chemistry. Dept of Chemistry, McMaster University, Hamilton, Ont. L8S 4M1, Canada.
  • Grice, Dr Joel Denison Research Scientist. Canadian Museum of Nature, PO Box 3443, Stn D, Ottawa, Ont. K1P 6P4, Canada.
  • Groat, Professor Lee A. Professor. Department of Earth and Ocean Sciences, University of British Columbia, Vancouver, BC V6T 1Z4, Canada.
  • Grochulski, Dr Pawel Bio/Life Sciences Manager & Adjunct Professor. Canadian Light Source, 44 Innovation Boulevard, Saskatoon, SK S7N 2V3, Canada.
  • Grundy, Dr Harry Douglas professor emeritus. Dept of Geology, McMaster University, Hamilton, Ont. L8S 4M1, Canada.
  • Guarne, Dr Alba Professor. Biochemistry, McGill University, 3649 Promenade Sir William Osler, QC, H3G 0B1, MOntreal, Canada.
  • Gytz Olesen, Miss Heidi Postdoctoral Researcher. Biochemistry, McGill University, 3655 Promenade Sir William Osler, Quebec, H3A 0G4, Montreal, Canada.
  • Hadj Youssef, Dr Azza Postdoctoral fellow. Materials science, Institut National de la recherche scientifique, 1650 boul. Lionel-Boulet, Quebec, J3X 1S2, Varennes, Canada.
  • Hallas, Ms Alannah Graduate Student - Physics. Department of Physics and Astronomy, McMaster University, 1280 Main Street West, Ontario, L8S 4L8, Hamilton, Canada.
  • Harding, Mrs Rachel PhD Student. Structural Genomics Consortium, MaRS Building Suite 700, University of Toronto, 101 College Street, M5G1L7, Toronto, Canada.
  • Hawthorne, Dr Frank Christopher Distinguished Professor Emeritus. Dept of Geological Sciences, University of Manitoba, Winnipeg, Manitoba R3T 2N2, Canada.
  • Hempel, Dr Andrew research associate, retired. Biochemistry, University of Toronto, -, Ontario, M5S 1A8, Toronto, Canada.
  • Henderson, Dr Grant S. Associate Professor. Geology Dept, University of Toronto, 22 Russell St., Toronto, Ont. M5S 3B1, Canada.
  • Hofmann, Mr Adrian MSc Candidate. Department of Cell and Systems Biology, L4J7B6, Thornhill, Canada.
  • Holyoak, Dr Todd Associate Professor. Biology, University of waterloo, 200 University Ave. W, ON, N2L 3G1, Waterloo, Canada.
  • Howell, Dr P. Lynne Senior Scientist; Professor. Molecular Medicine, Hospital for Sick Children, 555 University Avenue, Toronto, Ont. M5G 1X8, Canada.
  • Huang, Mr Ji Graduate student. Biological Sciences, University of Calgary, 2500 University Dr. NW, Alberta, T2N 1N4, Calgary, Canada.
  • Huber, Dr Carol P. adjunct professor. Dept of Biochemistry, University of Ottawa, 451 Smyth Rd, Ottawa, Ont. K1H 8M5, Canada.
  • Huo, Miss Siqi Student. Chemistry, Simon Fraser University, 8888 University Dr, BC, V5A 1S6, Burnaby, Canada.
  • Huot, Professor Dr Jacques Professor. Chemistry, Biochemistry and Physics, UQTR, 3351 Boul. des Forges, Quebec, G9A 5H7, Trois-rivieres, Canada.
  • Huskic, Dr Igor Postdoctoral researcher. Chemistry, McGill University, 801 Sherbrooke St. West, Otto Maass pavillion 440, Quebec, H3A 0B8, Montreal, Canada.
  • Hutcheon, Dr Wendy Lou retired. 4437 West 13th Avenue, B.C., V6R 2V2, Vancouver, Canada.
  • Jalilehvand, Professor Farideh Associate Professor. Chemistry, University of Calgary, 2500 University Dr. NW, Alberta, T2N 1N4, Calgary, Canada.
  • Jamalidinan, Ms Fatemehsadat PhD student. University of Calgary, -, -, Calgary, Canada.
  • James, Dr Margaret Ann professor emeritus. Department of Chemistry, Mt St Vincent University, Bedford Highway, NS, B3M 2J6, Halifax, Canada.
  • James, Professor Michael Professor. Department of Biochemistry, University of Alberta, 114 St and 87 Ave, Alberta, T62H7, Edmonton, Canada.
  • James, Professor Michael N. G. University Professor, Canada Research Chair. Biochemistry Dept, University of Alberta, Edmonton, Alta T6G 2H7, Canada.
  • Jarvis, Miss Victoria Research Scientist. Chemistry and Chemical Biology, McMaster University, 1280 Main St. W., ON, L8S 4M1, Hamilton, Canada.
  • Jennings, Dr Michael Free Lance Crystallographer. 185 Chelsea Avenue, Ontario, N6J 3J5, London, Canada.
  • Jha, Dr Vikash Postdoctoral Fellow. Dr. Vikash Jha, Room M335 Medical Sciences Building, Department of Biochemistry, The University of Western Ontario, London, Ontario, Canada N6A 5C1.
  • Jia, Dr Zongchao Professor and Canada Research Chair. Department of Biochemistry, Queen's University, Kingston, Ontario K7L 3N6, Canada.
  • Jones, Ms Kyra PhD Candidate. Department of Biology, University of Waterloo, 200 University Ave. W., Ontario, N2L 3G1, Waterloo, Canada.
  • Julien, Mr Patrick PhD Candidate Chemistry. Chemistry, McGill University, 801 Sherbrooke Street West, Quebec, H3A 2K6, Montreal, Canada.
  • Junop, Professor Dr Murray Assistant Prof. Biochemistry, McMaster University, 1200 Main St. W., Ontario, L8N 3Z5, Hamilton, Canada.
  • Kinross, Ms Alison Wirsig Graduate student. 1280 Main St. W, L8S4L8, Hamilton, Canada.
  • Klug, Dr Dennis D. senior research officer. Steacie Inst. of Molecular Science, National Research Council of Canada, Ottawa, Ont. K1A 0R6, Canada.
  • Kodama, Dr Hideomi senior research scientist, retired. Centre for Land & Biol. Resource Res. CEF, Agriculture Canada, Carling Ave, Ont., K1A 0C6, Ottawa, Canada.
  • Kolpakov, Mr Alexander Lecturer. Department of Mathematics, University of Toronto, 40 St George Street, ON, M5S 2E4, Toronto, Canada.
  • Korosec, Mr Chapin Student. 1023 upper king street, Ontario, L8S1X9, Hamilton, Canada.
  • Kruglyak, Ms Natasha PhD candidate. Biochemistry, University of Toronto, 101 College St, MaRS-TMTD, Rm 5-401G, Ontario, M5G 1L7, Toronto, Canada.
  • Kycia, Professor Stefan Walenty University Physics Professor. Physics, University of Guelph, Gordon Street, Ontario, N1G2W1, Guelph, Canada.
  • Labiuk, Dr Shaunivan Research Associate. Canadian Macromolecular Crystallography Facility, Canadian Light Source, Inc., 101 Perimeter Road, SK, S7N 0X4, Saskatoon, Canada.
  • Lario, Dr Paula Team Lead, Protein Engineering. Paula Lario PhD, Zymeworks, Inc., 540-1385 West 8th Ave, Vancouver, BC V6H 3V9, Canada.
  • Lee, Dr Jeffrey E. Senior Research Associate. Laboratory Medicine and Pathobiology, University of Toronto, 1 King's College Circle, Ontario, M5S 1A8, Toronto, Canada.
  • Leontowich, Dr Adam Associate Scientist. Science Division, Canadian Light Source, 44 Innovation Boulevard, Saskatchewan, S7N 2V3, Saskatoon, Canada.
  • Le Page, Dr Yvon senior research officer. retired. Inst. for Chemical Process and Environmental Technology, National Research Council of Canada, M-12, B-9 Ont., K1A 0R6, Ottawa, Canada.
  • Leung, Mr Kevin Student. Biochemistry MSB 330, Western University, 1151 Richmond Street, London, ON, N6A3K7.
  • Li, Chunmin Research Associate. Department of Chemistry, University of British Columbia, BC, V6T 1Z1, Vancouver, Canada.
  • Li, Dr Delin Senior Metallurgist. Wescast Industries Inc, 150 Savannah Oaks Dr, ON, N3T 5L8, Brantford, Canada.
  • Liu, Dr Xubo postdoctorate in condense matter physics. Physics Department, 3600 University Street, Quebec, H3A 2T8, Montreal, Canada.
  • Lobsanov, Dr Yuri D. Research Associate. Structural Biology and Biochemistry, Research Institute, Hospital for Sick Children, 555 University Avenue, Toronto Ontario M5G 1X8, Canada.
  • Loewen, Dr Michele Research Officer. PBI-NRC, 110 Gymnasium Place, SK, S7N0W9, Saskatoon, Canada.
  • Lough, Dr Alan John X-ray service manager. Chemistry, University of Toronto, 80 St. George St., Ontario, M5S 3H6, Toronto, Canada.
  • Luo, Dr Yu Associate Professor. HSC Rm B109B, Dept Biochemistry, University of Saskatchewan, 107 Wiggins Road, SK S7N 5E5, Saskatoon, Canada.
  • Macdonald, Professor Dr Charles Professor of Chemistry. Chemistry and Biochemistry, University of Windsor, 401 Sunset Ave, Ontario, N9B 3P4, Windsor, Canada.
  • Mar, Dr Arthur professor. Chemistry Dept, University of Alberta, Edmonton, Alta T6G 2G2, Canada.
  • Maris, Dr Thierry Research Scientist. Chimie, Université de Montréal, Pavillon J-Armand Bombardier 5155 Decelles, Québec, H3T 2B1, Montréal, Canada.
  • Marjerrison, Miss Casey Student. Physics and Astronomy, McMaster University, 1280 Main Street West, Ontario, L8S 4L8, Hamilton, Canada.
  • Mark, Dr Brian L. Associate Professor of Microbiology and Biochemistry. 418 Buller Building, University of Manitoba, 45 Chancellor's Circle, Manitoba, R3T 2N2, Winnipeg, Canada.
  • Marquardt, Dr Drew Assistant Professor. Department of Chemistry and Biochemistry, 401 Sunset Avenue, Windsor, Ontario, Canada N9B 3P4.
  • Masuda, Professor Dr Jason Full Professor. Department of Chemistry, Saint Mary's University, 923 Robie St., Nova Scotia, B3H 3C3, Halifax, Canada.
  • Matta, Professor Cherif Professor. Chemistry, Mount Saint Vincent University, 166 Bedford Hwy, Nova Scotia, B3M2J6, Halifax, Canada.
  • Maurus, Robert Instructor. Dept of Biochemistry, University of British Columbia, 2146 Health Sciences Mall, Vancouver, BC V6T 1Z3, Canada.
  • Maxwell, Professor George Associate professor, emeritus. Mathematics Dept, University of British Columbia, #121-1984 Mathematics Rd, Univ. Campus, BC, V6T 1Y4, Vancouver, Canada.
  • McDonald, Dr Robert manager, crystallographic service lab. Chemistry Dept, University of Alberta, 11227 Saskatchewan Drive NW, Alberta, T6G 2G2, Edmonton, Canada.
  • McGrath, Dr Teresa Ontario Genomics Institute, 101 College St, Ontario, Toronto, Canada.
  • Meier, Dr Markus Research Associate. Chemistry, University of Manitoba, 144 Dysart Road, MB, R3T 2N2, Winnipeg, Canada.
  • Mercier, Dr Patrick Researcher. Corem, 1180, rue de la Minéralogie, QC, G1N 1X7, Québec, Canada.
  • Mihichuk, Professor Lynn Michael Associate professor. Chemistry, University of Regina, 3737 Wascana Parkway, LB 244, S4S 0A2, Regina, Canada.
  • Millington, Miss Anna Student. Physics and Astronomy, 1280 Main Street West, L8S4L8, Hamilton, Canada.
  • Mills, Dr Allison M. Editor. Codes Canada, National Research Council of Canada, -, -, Ottawa, Canada.
  • Mitchell, Professor Keith A. R. Professor Emeritus. Dept of ChemistryU. British Columbia, BC, V6T 1Z1, Vancouver, Canada.
  • Munsie, Mr Timothy PhD Student. Tim Munsie, Department of Physics & Astronomy, ABB-241, McMaster University, 1280 Main St. W, Hamilton, ON, L8S 4M1, Canada.
  • Murphy, Professor Michael Edward Patrick Professor. Department Microbiology and Immunology, 2350 Health Sciences Mall, University of British Columbia, Vancouver, BC V6T 1Z3, Canada.
  • Musa, Ms Tracey 100 University Avenue, Toronto, Canada.
  • Nachman, Dr Joseph Clinical Research Analyst. Princess Margaret Cancer Centre, -, ON, -, Toronto, Canada.
  • Nayak, Dr Sashank Sekhar Research Associate. Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Avenue West, Ontario, Waterloo, Canada.
  • Ng, Dr Kenneth Kai-Sing Associate Professor. Biological Sciences, University of Calgary, 2500 University Dr NW, Alberta, T2N 1H4, Calgary, Canada.
  • Nguyen, Ms Nham research technician. Department of Biochemistry and Molecular Biology, University of British Columbia, 2146, Health Sciences Mall, BC, V6T 1Z3, Vancouver, Canada.
  • Nienaber, Kurt Graduate Student. 114 Science Place, Saskatchewan, S7N 5E2, Saskatoon, Canada.
  • Oliynyk, Mr Anton Graduate Student. Chemistry, University of Alberta, 11227 Saskatchewan Drive, Alberta, T6G 2G2, Edmonton, Canada.
  • Olovsson, Dr Gunnar Research Associate. Dept. of Biochemistry, University of British Columbia, 2350 Health Sciences Mall, B.C., V6T 1Z3, Vancouver, Canada.
  • Paetzel, Dr Mark Professor. Department of Molecular Biology and Biochemistry, Simon Fraser University, 8888 University Dr., British Columbia, V5A 1S6, Burnaby, Canada.
  • Pai, Dr Emil F. Professor; Senior Scientist. Dept of Biochemistry, U. of Toronto, Toronto, Ont. M5S 1A8, Canada.
  • Paige, Dr Christopher retired. Dr. C. R. Paige,1806 Easthill, Saskatoon, S7J 3C1, SK.
  • Park, Dr Jaeok Assistant Professor. Biochemistry, Memorial University of Newfoundland, 232 Elizabeth Ave., NL, A1B 3X9, St. John's, Canada.
  • Parvez, Dr Masood Senior Instructor. Dept of Chemistry, U. of Calgary, 2500 University Dr., NW, Calgary, Alta T2N 1N4, Canada.
  • Patel, Dr Trushar Assistant Professor. Chemistry and Biochemistry, University of Lethbridge, 4401 University Drive, Alberta, T1K 3M4, Lethbridge, Canada.
  • Patrick, Dr Brian Staff Crystallographer. Chemistry, University of British Columbia, 2036 Main Mall, British Columbia, V6T1Z1, Vancouver, Canada.
  • Payne, Professor Nicholas Charles Professor emeritus. Chemistry, Rm 24A ChB, University of Western Ontario, 1151 Richmond Street, Ontario, N6A 5B7, London, Canada.
  • Peek, Mr James Student. Cell and Systems Biology, University of Toronto, 25 Willcocks Street, Ontario, M5S3B2, Toronto, Canada.
  • Peterson, Professor Ronald Charles Professor of mineralogy. Dept of Geology, Queen's University, Kingston, Ont. K7L 3N6, Canada.
  • Pham, Miss Ngoc Thu Hang PhD Student. Institut Armand-Frappier, INRS, 531 Boul des Prairies, QC, H7V 1B7, Laval, Canada.
  • Phipps, Dr Barry Research Scientist. 75 Rockbluff Close NW, Calgary, Alberta, Canada T2N 5B2.
  • Poulin, Mrs Suzie retired. Génie physique, École polytechnique de Montréal, 6079 Succ. Centre-ville, Québec, H3C 3A7, Montréal, Canada.
  • Powell, Dr Brian Mathieson retired. Chalk River Laboratories, Chalk River, Ont. K0J 1J0, Canada.
  • Prezioso, Ms Stephanie Graduate Student. Cell and Systems Biology, University of Toronto, 25 Willcocks St., Ontario, M5S 3B2, Toronto, Canada.
  • Prince, Ms Chelsy Caryn Graduate Student. Biomedical and Molecular Sciences, Queen's University, 18 Stuart Street, Ontario, K7L3N6, Kingston, Canada.
  • Prive, Dr Gilbert G. Senior Scientist/Professor. Princess Margaret Cancer Centre/PMCRT, 101 College Street, Toronto, Ont. M5G 1L7, Canada.
  • Qazi, Dr Shahzada Junaid Shreef Post doctoral fellow. Pulp and paper center, University of british columbioa, 2385 East Mall, BC, V6T 1Z4, Vancouver, Canada.
  • Quail, Dr J. Wilson professor emeritus. Dept of Chemistry, University of Saskatchewan, 110 Science Place, Saskatoon, Sask. S7N 5C9, Canada.
  • Rader, Professor Stephen D. Associate Professor of Chemistry. 3333 University Way, Prince George, British Columbia, V2N 4Z9, CANADA.
  • Raudsepp, Dr Mati research scientist, hon. professor. Dept of Earth and Ocean Sciences, University Of British Columbia, Vancouver, BC V6T 1Z4, Canada.
  • Richardson, Dr Mary Frances professor emeritus. Chemistry Dept, Brock University, Glenridge Ave, Ont., L2S 3A1, St Catherines, Canada.
  • Rini, Dr James associate professor. Dept of Molecular and Medical Genetics, Medical Sciences Building, Rm. 5360, University of Toronto, 1 King's College Circle, Toronto, Ontario, M5S 1A8, Canada.
  • Ritch, Professor Jamie Associate Professor of Chemistry. Department of Chemistry, The University of Winnipeg, 515 Portage Avenue, Manitoba, R3B 2E9, Winnipeg, Canada.
  • Roberts, Mr Andrew Clifford X-ray diffraction mineralogist (emeritus). Geological Survey of Canada, 766-601 Booth St., Ottawa, ON K1A 0E8, Canada.
  • Robertson, Professor Beverly Ellis professor emeritus. Dr. Bev Robertson, 4204 Wascana Ridge, Regina SK. Canada S4R 2T1.
  • Rochon, Dr Fernande D. Associate professor. U. du Québec à Montréal, Dépt. de Chimie, CP 8888, Succ. Centre-ville, Montréal, Qué. H3C 3P8, Canada.
  • Rodgers, Dr John R. President. Toth Information Systems Inc., 2045 Quincy Ave., Gloucester, Ont. K1J 6B2, Canada.
  • Rodriguez, Miss Dubrasvka Research. PARIMA Inc, 4450 Rue Cousens, H4S 1X6, Saint-Laurent, Canada.
  • Root, Dr J.H. research scientist, retired. Neutron & Condensed Matter Sci., AECL Research, Chalk River Labs, Ont., K0J 1J0, Chalk River, Canada.
  • Rose, Dr David Richard Professor. Department of Biology, University of Waterloo, 200 University Ave, W, Waterloo, Ontario, Canada, N2L 3G1.
  • Sahtout, Miss Naheda PhD Candidate. Chemistry (David Sanders Laboratory), University of Saskatchewan, 110 Science Place, Saskatchewan, S7N 5C9, Saskatoon, Canada.
  • Sanders, Dr David Associate Professor of Chemistry. Department of Chemistry, University of Saskatchewan, 110 Science Place, SK, S7N 5C9, Saskatoon, Canada.
  • Saridakis, Dr Vivian Associate Professor. Biology, York University, 4700 Keele Street, Ontario, M3J1P3, Toronto, Canada.
  • Schaper, Professor Dr Frank Professeur. Chimie, Université de Montréal, C.P. 6181 Succ. Centre-Ville, QC, H3C3J7, Montréal, Canada.
  • Schrag, Dr Joseph D. senior research officer. Biotechnology Res. Inst., 6100 Royalmount Ave., Montréal, Qué. H4P 2R2, Canada.
  • Secco, Dr Anthony Silvio Vice President - Academic. University of New Brunswick, -, -, Fredericton, Canada.
  • Selway, Dr Julie B. Senior Project Geologist. Canada.
  • Shilton, Professor Brian Professor. Biochemistry, University of Western Ontario, 1151 Richmond St, Ontario, N6A 5C1, London, Canada.
  • Siddiqui, Mr Mohd Quadir Postdoctoral researcher. Alberta RNA Research and Training Institute, Department of Chemistry and Biochemistry, The University of Lethbridge, -, -, Alberta, Canada.
  • Simard, Dr Michel manager X-ray lab. Université de Montréal, Dépt. de Chimie, CP 6128, Succ. A, Montréal, Qué. H3C 3J7, Canada.
  • Singh, Miss Noreen Graduate Student - MSc Candidate. Department of Biological Sciences, University of Calgary, 2500 University Dr. NW, T2N 1N4, Calgary, Canada.
  • Skowron, Dr Aniceta President. Geometro, -, -, Ontario, Canada.
  • Smith, Dr G. David Emeritus Scientist. Molecular Structure and Function, The Hospital for Sick Children, 555 University Avenue, Ontario, M5G 1X8, Toronto, Canada.
  • Sokolova, Dr Elena Professor. Department of Geological Sciences, University of Manitoba, Winnipeg, MB, Canada R3T 2N2.
  • Soldatov, Dr Dmitriy Associate Professor. Department of Chemistry, University of Guelph, 50 Stone Rd. E, Ontario, N1G 2W1, Guelph, Canada.
  • Starkey, Professor John Professor. Prof. J. Starkey, Earth Sciences Dept., University of Western Ontario, London, Ontario N6A 3B7, Canada.
  • Stephen, Dr Preyesh Postdoc. T4-08, Centre hospitalier de l'Université Laval, Boulevard Laurier, Quebec city, Canada.
  • Stogios, Dr Peter Research Associate. Chemical Engineering and Applied Chemistry, University of Toronto, 200 College St, Room 409, Ontario, M5S 3E5, Toronto, Canada.
  • Strusievicz, Robert Director. Rose Coulee Ltd, 4935 DALTON DRIVE NW, Alberta, T3A 2E5, Calgary, Canada.
  • Strynadka, Dr Natalie Professor of Biochemistry and Molecular Biology. Biochemistry and Molecular Biology, University of British Columbia, 2350 Health Science Mall, BC, V6T 1Z3, Vancover, Canada.
  • Subramaniam, Professor Sriram Professor. Faculty of Medicine, University of British Columbia, BC, V6T 1Z3, Vancouver, Canada.
  • Suits, Dr Michael Assistant Professor. Chemistry & Biochemistry, Wilfrid Laurier University, 75 University Avenue West, Ontario, N2L 3C5, Waterloo, Canada.
  • Sundararajan, Dr Pudupadi R. Professor. Department of Chemistry, Carleton University, 1125 Colonel By Drive, Ottawa, Ontario K1S 5B6, Canada.
  • Sunder, Dr Sham Senior Scientist, retired. Fuel & Fuel Channel Safety Branch, Atomic Energy of Canada Limited, Chalk River Laboratories, ON, K0J 1J0, Chalk River, Canada.
  • Sutton, Dr Mark professor. Physics Dept, McGill University, Montréal, Qué. H3A 2T8, Canada.
  • Swainson, Dr Ian Peter Research Officer. Neutron Program for Materials Research, Station 18, Chalk River Labs, Chalk River, Ont. K0J 1J0, Canada.
  • Sygusch, Professor Jurgen professor. Département de Biochimie, Université de Montréal, CP 6128, Succ. A, Montréal, Qué. H3C 3J7, Canada.
  • Szell, Mr Student. 10 Marie Curie St., K1N 6N5, Ottawa, Canada.
  • Topic, Dr Filip Post-doctoral researcher. Chemistry, McGill University, -, Quebec, -, Montreal, Canada.
  • Trotter, Professor James emeritus professor. Department of Chemistry, University of British Columbia, University Blvd., BC, V6T 1Z1, Vancouver, Canada.
  • Tse, Professor John S. Professor, Canada Research Chair in Materials Science. Physics and Enginerring Physics, University fo Saskatchewan, 116 Science Place, SK, S7N 5E2, Saskatoon, Canada.
  • Tun, Dr Zin Director and Secretary/Treasurer. TVB Associates, -, Ontario, -, Hamilton, Canada.
  • Ulaganathan, Mrs ThirumalaiSelvi Student. Biochemistry, University of Saskatchewan, 3D40, Health science building, 107 Wiggins road, Saskatchewan, S7N5E5, saskatoon, Canada.
  • Vanderkooy, Alan Student. Chemistry, University of Toronto, 80 St. George Street, Ontario, M5S 3H6, Toronto, Canada.
  • Van Petegem, Professor Filip Assistant Professor. Biochemistry and Molecular Biology, University of British Columbia, 2350 Health Sciences mall, room 2356, BC, V6T 1Z3, Vancouver, Canada.
  • Wahba, Mr Haytham Ph.D student. Biochemistry, James G. Omichinski Lab, University of Montreal, 2900 Boul. Édouard-Montpetit, Local: Pavillon Roger-Gaudry - D-310, Quebec, H3T 1J4, Montreal, Canada.
  • Wasylishen, Professor Roderick Professor Emeritus. Department of Chemistry, University of Alberta, Gunning-Lemieux Chemistry Centre, Alberta, T6G 2G2, Edmonton, Canada.
  • Wicks, Dr Frederick John Head, retired 2003. Department of Mineralogy, Royal Ontario Museum, 100 Queen's Park, Ontario, M5S 2C6, Toronto, Canada.
  • Wolodko, Dr William T. Faculty Service Officer, retired. University of Alberta, Dept of Biochemistry, Alta, T6G 2H7, Edmonton, Canada.
  • Wong, Mr Norman Graduate Student. Chemistry, University of Calgary, 2500 University Dr, Alberta, T2N1N4, Calgary, Canada.
  • Yan, Professor Dr Xiaoqian Professor. Chemistry Department, Brandon University, Brandon, MB R7A 6A9, Canada.
  • Yang, Professor Daniel Shun-Chung Professor. McMaster University, Biochemistry Dept, 1200 Main St. West, Hamilton, Ont. L8N 3Z5, Canada.
  • Yang, Dr Jian Assistant Professor. College of Pharmacy and Nutrition, University of Saskatchewan, 110 Science Place, Saskatoon, Sask. S7N 5C9, Canada.
  • Yao, Dr Yansun Assistant Professor. Department of Physics and Engineering Physics, University of Saskatchewan, 116 Science Place, Saskatchewan, S7N 5E2, Saskatoon, Canada.
  • Yin, Dr Jiang Executive. Biochemistry, University of Alberta, 429 Medical Science Bldg., Alberta, T6G2H7, Edmonton, Canada.

Canada

This is a list of forthcoming meetings in Canada that are recorded in the IUCr Calendar of Events. Please let us know of any that are missing by completing this form or sending an email to forthcoming.meetings@iucr.org.

All events

This is a concise listing of all events in this country that are associated with the International Year of Crystallography 2014 and its follow-up initiatives.

28th Mar 2014 Wilfrid Laurier Faculty of Science Poster Conference Waterloo, ON
5th Aug 2014 IUCr XXIII Palais des congress, Montreal
6th Aug 2014 Voyage dans le Cristal (Journey into the Crystal) 1st floor in the Viger Couloir, Palais des congrès de Montréal, QC
6th Aug 2014 Crystals: A World to Discover Leacock Building, Room 132, McGill University Campus, Montreal, QC
7th Aug 2014 Quasi-Periodic Crystals – a Paradigm Shift in Crystallography Leacock Building, Room 132, McGill University Campus, Montreal, QC
9th Aug 2014 HKL...XYZ Montreal
11th Aug 2014 What is a Crystal? New Answers to an Old Question Leacock Building, Room 132, McGill University Campus, Montreal, QC
14th Aug 2014 The Role of Magnetic Symmetry in the Description and Determination of Magnetic Structures Hamilton
15th Sep 2014 Hands-on workshop Canadian Light Source, Saskatoon
15th Sep 2014 Celebrating 100 Years University of Saskatchewan, Saskatoon
Canada: National Crystal Growing Competition Nationwide The National Crystal Growing Competition is a fun, hands-on experience as well as an exciting competition.

This Special Report was published in the IUCr Newsletter, Vol. 17, No. 4 (2009) and Vol. 18, No. 2 (2010).

Crystallography in Canada

[Maple leaf logo] 'Feuille d’érable - p4g - Maple Leaf' by François Brisse: Logo of the Canadian National Committee for Crystallography (CNCC). This logo is based on a crystallographic artwork produced by François Brisse (then, as now, of the Department of Chemistry at the University of Montreal). This motif was also originally used for the 1981 IUCr 12th Congress in Ottawa [Brisse, F., (1981) La Symétrie Bidimensionelle et le Canada. Canadian Mineralogist, Vol. 19, pp. 217-224].
We saw this Crystallography in Canada edition of the IUCr newsletter as a valuable opportunity to obtain articles of Canadian crystallographic history written by 'those who were there': scientists involved in the crystallography of olden time starting in the early 1940s to 1950s. Much of this history is not described in print and would potentially be lost if not written down or recorded in some form now or in the near future. We were more successful in this than we thought possible and obtained more articles than can be published in a single edition of the IUCr Newsletter.

While the IUCr newsletter editors requested a good balance of current versus historical Canadian Crystallography, it was found that historical articles had a higher submission rate. 'C'est la vie.' Information on current Canadian Crystallography can always be obtained by browsing the web, but unless historical memories and history are somehow published, it can be lost. The IUCr newsletter is an appropriate forum to help ensure much informal crystallographic history is not lost. Many of the personal accounts describe extensive education, training and research outside Canada.

  • 'Some early Canadian crystallographers' by Carol P. Huber
  • 'Larry Calvert (1924-1993): metals, accuracy, powder method and structure databases; a lasting heritage' by Yvon Le Page
  • 'Mineralogical crystallography in Canada' by Frank C. Hawthorne
  • 'For the love of computers in the 1950s' by Farid R. Ahmed
  • 'Crispin Calvo' by Abraham Clearfield
  • 'Early days of protein crystallography in Canada' by Michael James
  • 'Eric Gabe' by Eric Gabe
  • 'Osvald Knop' by T. Stanley Cameron
  • 'QTAIM: quantum theory of atoms in molecules' by Richard F. W. Bader with 'Comments on QTAIM' by T. Stanley Cameron
  • 'A life in science' by Andrew D. Booth
  • '19th century basics spearhead 21st century progress: some autobiographic details' by Yvon Le Page
  • 'Veritas vos liberabit: code of ethics in scientific work' (reprint) by Joseph (José) Désiré Hubert Donnay (1902-1994)
  • 'Stanley C. Nyburg' by Stanley C. Nyburg
  • 'I. David Brown' by I. David Brown
  • 'A. C. Larson in Canada' by Allen C. Larson
  • 'An interesting interlude with pyrolytic graphite' by Sandy Mathieson

By their variety, we hope these articles will be found informative and interesting, both to the state of current Canadian crystallography (some of it at least), and to its history. During the IUCr 2008 Congress in Osaka, we received more suggestions as to possible historical articles but these needed deferring to a later time. However, as the Montreal IUCr Congress approaches in 2014, we hope to publish more Canadian crystallographic history (currently hidden and undescribed) into the scientific light via the IUCr newsletter.

The Canadian National Committee for Crystallography (CNCC)
(www.canadiancrystallography.ca/)

Dedicated to Professor Louis T. J. Delbaere (1943-2009)
(CNCC committee chair, June 2005 to October 2009)

Some early Canadian crystallographers

[William H. Barnes] William Howard Barnes

Probably the first Canadian-born scientist to have an important influence on the development of crystallography in Canada was William H. Barnes. Born in Montreal in 1903, the son of a physicist, he was educated at McGill University, receiving BSc, MSc and PhD degrees there, his PhD in 1927. He subsequently spent three years on Fellowships at the Royal Institution in London under the supervision of Sir William H. Bragg. While there he developed his interest in the analysis of crystal structures by X-rays, and carried out pioneer work on the structure of ice. He returned to Canada in 1930 to join the faculty at McGill University. Legend has it that he carried on low-temperature crystallography at McGill by positioning a camera outside his laboratory window in winter. In 1946 he obtained a Guggenheim Fellowship and went off to MIT to spend a year working with Martin Buerger. He came back to Canada in 1947 in order to establish an X-ray Diffraction Section in the Division of Pure Physics at the National Research Council of Canada, and he remained Head of this section until his retirement in 1968. A few years after his arrival, the NRC Post-Doctoral Fellowship program was established, enabling many young crystallographers from abroad to spend a year or two working in his laboratory. Some of them returned subsequently to their own countries to carry on crystallography there, most notably David Phillips (later Lord Phillips of Ellesmere), who went back to Britain and later became Prof. of Molecular Biophysics at Oxford. Several people from Barnes' lab later set up new crystallographic research or teaching centres in Canada, and so his influence spread across the country.

Dr. Barnes played a major role in persuading the National Research Council in 1948 to adhere to the IUCr for Canada, and was Chair of the Canadian National Committee for Crystallography from 1948 until 1966. He served very successfully as Chairman of the Organizing Committee for the IVth IUCr Congress in 1957 in Montreal. From 1960 until 1966, he was a member of the IUCr Executive Committee. His main research interests were structural studies of vanadium minerals, the use of powder diffraction to identify narcotics and drugs, and the determination of structures of drug-related compounds.

[Maria Przybylska] Maria Przybylska
[Larry D. Calvert, 2008] Larry D. Calvert
[Farid R. Ahmed, graduation] Farid R. Ahmed
[Al Hanson] Al Hanson

Two young women crystallographers from Glasgow, Maria Przybylska and Violet Shore, were the first two people to receive NRC Postdoctoral Fellowships and both of them went to work with Barnes, arriving in December 1949. Both had earned doctorates in the lab of J. M. Robertson. Violet Shore went back to Britain after her fellowship years, while Maria Przybylska set up a new lab in the Division of Applied Chemistry at NRC and a few years later moved to the Division of Pure Chemistry, also at NRC, and started up another group. Larry Calvert came from New Zealand to the Barnes lab in 1952, and after his fellowship was completed, set up his own group in the Division of Applied Chemistry. This group later included Eric Gabe and Yvon LePage. Farid Ahmed joined the Barnes group in 1955 from England, where he had received his doctorate in Durward Cruickshank's lab. Barnes could foresee the important role that general-purpose digital computers could play in crystal structure determination and refinement, and encouraged Farid to develop suites of computer programs for the most advanced computers accessible to the group. Over the years, programs were written for the Ferranti FERUT, the IBM 650, IBM 1620, the IBM System 360, and the IBM 3090. Farid Ahmed remained a member of the original group until the groups in Pure Physics and Pure Chemistry merged in 1968, and eventually he was appointed head of the merged group. He served in that capacity until his retirement in 1990. Al Hanson, a Canadian who had received his PhD in Manchester, was also an early member of the Barnes group, arriving in 1955 and staying until 1978, when he left to start a structural lab in NRC's Atlantic Regional Laboratory in Halifax.

[Jim Trotter, graduation] Jim Trotter
[I. D. Brown] I. David Brown

Jim Trotter arrived at the Barnes lab in 1957 from Glasgow as a postdoctoral fellow, and in 1960 he went west to Vancouver, and started crystallography at the University of British Columbia. In the ensuing 38 years he trained many crystallographers in his lab there. In 1959 David Brown arrived at McMaster University from the University of London (UK), initially to help Howard Petch, an NMR chemist, build a neutron diffractometer for the reactor at McMaster. David stayed, subsequently built a crystallography group, and is still active there now.

[Leonard Berry and A. J. C. Wilson] Leonard Berry (right) with A. J. C. Wilson on the left.
[Robert B. Ferguson, b/w] Robert B. Ferguson

The 1940s also were the time that the mineralogists became active in Canada. Leonard Berry joined the faculty of Queen's University in Kingston, Ontario, in 1944 as a mineralogist and crystallographer, and remained there for 38 years. Leonard was a member of the Canadian National Committee for Crystallography from 1948 until 1970, and served as its Chairman from 1966 until 1970. Mineralogy was also represented in western Canada by Robert Ferguson who began his career at the University of Manitoba in 1947. Although he was in the Dept. of Geology, he supervised several chemical crystallography students there, including Michael James, Louis Delbaere, and me, in addition to mineralogy graduate students. Upon his retirement in 1985, he was appointed Professor Emeritus and carried on his research for some years.

Even before the days of Berry and Ferguson, J. D. H. Donnay spent from 1939 until 1942 as a professor at Laval University, and thirty years later JDH returned to Canada to be with his wife Gabrielle Donnay when she was appointed Professor of Crystallography at McGill.

[Osvald Knop] Osvald Knop
The first person doing crystallography in the Maritime provinces was probably Osvald Knop, who was born in Czechoslovakia in 1922 and arrived in Halifax in 1957 after stays at Caltech and Laval University. After 7 years at Nova Scotia Technical College he moved to Dalhousie University, also in Halifax, and remained there for many years, as an emeritus professor after retirement.

Canada can also lay partial claim to two famous crystallographers who ended up elsewhere. A. L. Patterson, although he was born in New Zealand, grew up in Montreal and received his University education at McGill. He completed his PhD work there in 1928. He left McGill, after an additional year as a lecturer, to join Wyckoff's group in New York. A. J. C. Wilson was born in Nova Scotia and received his university education there to the MSc level, which he obtained in 1936 at Dalhousie in Halifax. He apparently did not do any crystallography until his doctoral work at MIT.

I have had to employ an arbitrary cutoff limit, and have probably inadvertently missed some people whom I should have mentioned. If so, my apologies. Now there are crystallography groups in many Canadian cities, so our predecessors' efforts have borne fruit. Thanks are due to the following for providing photos and slides: Farid Ahmed and Margaret Pippy in Ottawa, Margaret James in Halifax, Tony Secco in Winnipeg, Ann Trotter in Vancouver, Marcia Colquhoun in Buffalo and Lachlan Cranswick in Chalk River.

(based on after-dinner remarks July 24, 1997; ACA conference, St. Louis, Missouri, USA)

Carol P. Huber, 1996 President of the American Crystallographic Assn

Larry Calvert (1924-1993): metals, accuracy, powder method and structure databases; a lasting heritage

[Larry Calvert's graduation, 1952] 1952: Larry Calvert's graduation (Courtesy Barbara Campbell).
Lauriston (Larry) Derwent Calvert (Ahmed & Le Page, 1993; Wallace & Mueller, 1993) was the son of Fred Clifford Calvert (1900-1974), a New Zealand mining engineer who worked mostly for tin dredging in Malaysia and for gold exploration or mining at many places in the southern hemisphere, registering his son at boarding schools where possible. Larry's pre-university education was accordingly garnered at a number of different schools, most of them in New Zealand, but it also included the Suva Boys Grammar School where he befriended sons of Fijian chiefs. At school recess time, he found employment in ordinary manual jobs, one of them cutting meat at a sheep meat-packing factory. He graduated in Philosophy from the University of New Zealand in Auckland. Awarded an MSc and then a PhD in chemistry in 1952, with Dame Kathleen Lonsdale as external examiner, Larry Calvert became the first New-Zealander crystallographer. In that year, he came to the Division of Physics of the National Research Council of Canada (NRC) as a research associate with William Barnes (Ahmed et al., 1981). Two years later, as a staff assistant research officer, he started an X-ray lab at NRC's then new Division of Applied Chemistry, from which he retired in 1985 as a principal research officer. Larry had two children, Alistair and Margaret, with his first wife Marjorie (d. 1980). He re-married in 1982 with Barbara (now Campbell). They retired at Lakes Entrance in the state of Victoria, Australia where he died in 1993, not very far from Tasmania, where he was born.

Larry was a man of substance and few words, with gentlemanly education and manners. He had a very strong sense of ethics and duty. A keen and sharp observer of his surroundings, he was not a person to be fooled by fast speech or pointless authority. Always friendly in his attitude, he was very cautious and concise in his written or spoken words, often carefully selected tongue-in-cheek words, to the extent that his wise replies and sound advice might at times have to be decrypted. He would never engage in a protracted argument or volunteer unsolicited advice or harsh comments. For example, if asked privately about an unconvincing presentation, he would use words like 'jazzy' to indicate a great presentation effort combined with modest substance, or 'jazzed-up' when the speaker had basically re-discovered the wheel. Results already presented several times before might be qualified with 're-hash'. 'Gum-flapping' would similarly convey his general evaluation of an unnecessary meeting without wasting words. If asked publicly, he would rather retreat behind a pretended 'loss of hearing due to old age' than volunteer negative comments.

As a person, Larry was characterized by a combination of a strong literary background, a curiosity for anything culturally different, a love for the southern hemisphere where he had grown up, and a sound judgment based on personal experience, on timeless wisdom and on biographies of which he was a keen reader. His approach to science and to life in general was always firmly based on facts or on time-proven observations, never far from verifiable facts. Larry was very knowledgeable about trees, plants, birds etc. of the Ottawa area, but his concept of a common tree remained a eucalyptus or a gum tree all along. Larry knew every illustration and every description in The Birds of Brewery Creek (Macdonald, 1947), but his concept of a bird was a kookaburra, a kiwi, or a parakeet. From his secondary school years in Fiji and New Zealand, he had acquired and retained all along a great interest and deep respect for the aboriginal cultures of the South Pacific. Larry also relished the company of any person from a different culture or a different background and loved to converse with them, mostly listening while sharing a brew or two, or introducing them to Koonunga Hill wines or Malay curry dishes. To settle an argument, or to show what the right direction was without wasting words, he would easily quote a Latin proverb or maxim with no ostentation: the point that the item being discussed and its time-proven solution were nothing new was instantly made. This came to him very naturally because his undergraduate education had been so strong in languages, literature and philosophy. Although he never mentioned it, Larry was a very regular blood donor as he left behind a Red Cross pin awarded to people who had given blood more than fifty times, still on its cardboard support bearing his name.

[Larry Calvert and Bryan Taylor at work] 1977: Larry Calvert (below) and Bryan Taylor poring over a Debye-Scherrer pattern at the Chemistry Division of NRC in Ottawa. (Courtesy Bryan Taylor)
Scientifically, Larry focused on the basics of a few key topics, most of which are still under development today. He maintained for example up-to-date files about precision and accuracy in diffraction-intensity and diffraction-angle measurement, about absorption and extinction corrections, about incident-beam polarization, about correction for polarization by the sample, about twinning, about standard materials and similar topics. While also practicing single-crystal diffraction, Larry was a staunch and enthusiastic proponent and practitioner of the powder method. The Rietveld least-squares full profile analysis (Rietveld, 1967) was for him one of the great inventions of the 20th century that would finally give justice to the then obsolescent powder-diffraction methods. He was eventually shown right and vindicated. He triumphed when the lecture room allotted to powder methods at the XIIth IUCr Meeting in Ottawa in 1981 was chock-full with standing attendance, many from industry, marking a turnpoint in the renaissance of powder methods. Over the years, he accumulated a collection of thousands of photographic powder-diffraction reference patterns of intermetallic materials that is still kept at the NRC. He contributed nearly 1,300 new experimental powder patterns to the JCPDS, and then to the ICDD Powder Diffraction File, most of them for intermetallic materials.

Larry was an extremely careful, even meticulous experimenter, always using internal standards for example, developing his own equipment with specially designed incident-beam or diffracted-beam monochromators, focusing geometry, evacuated diffraction chambers or multi-sample holders. He spent a lot of time fine-tuning all this, never fully satisfied with the results. He designed and built an evacuated small-angle scattering camera for fiber-diffraction studies with a remarkable collimation system that is still in use at the NRC.

Larry was not a big supporter of the then-prevailing 'publish-or-perish' approach to scientific research administration. He was instead patient and very thorough in everything he undertook, with meticulous attention to detail. In spite of this, he authored or co-authored 87 quality publications, spanning from 1954 to 1992, many on intermetallic materials, in particular rare-earth pnictides or CaNi5-type hydrogen-storage alloys (Calvert et al., 1985), way ahead of the current frenzy. His most frequent or noted co-authors were Bryan Taylor, John Murray, Don Heyding, Sandy Mathieson, Yu Wang, Eric Gabe, and Allen Larson etc. His models for significant research were people like E. H. Swanson from NBS, now NIST, and A. McL. Mathieson from CSIRO. Larry remained active in his retirement, as he co-edited with Pierre Villars the huge volumes of Pearson's Handbook of Crystallographic Data for Intermetallic Phases (1985, 1991) and wrote several articles, the last one in 1992.

Larry was Co-Editor of fourteen Structure Reports volumes from 1959 to 1981. The goal of those Reports was to collate succinct edited numerical primary data and graphical results for all crystal structures printed world-wide for that year, yet would nevertheless be so thorough that going back to the original paper would be unnecessary. Patiently cross-checking cell data, atomic coordinates, and Wyckoff positions as well as distances and angles was a monster job, often requiring querying authors internationally by steampost about typos in cell data or coordinates. A large majority of authors answered his polite and down-to-earth requests. As a consequence, his Structure Reports sections are actually more valuable than the original papers because they are free from typos. In other words, Larry's Structure Reports were the paper equivalent of edited crystal-structure database entries in those pre-internet days where even in-lab computers were a rarity.

Although not truly fluent in computer programming, Larry was always an enthusiastic supporter of quality crystallographic software, adding Eric Gabe and later myself, and then John Rodgers to the staff of the Chemistry Division's X-ray Diffraction lab. Larry frequently invited Allen Larson from Los Alamos for extended visits. This led to the automation of structure cross-checks for Structure Reports and to a pioneer version of crystal-structure databases, as a by-product of the automation of crystallographic data collection and its efficient and correct processing. The effort also allowed the creation of the NRCCAD and NRCVAX packages at the Chemistry Division in Ottawa, which are still in use today.

Larry assembled the Metals Data File (MDF) from the pre-1969 data that Don Cromer from LASL in Los Alamos, Bill Pearson from the University of Waterloo and himself had gathered in different formats. He integrated them and carried on with the whole post-1969 task until 1984. The initial programming by Allen Larson from LASL included such key routines as SPGP, a very compact routine to generate the general position of any space group from its Hermann-Mauguin short symbol, in standard orientation or not. This MDF software package was then much expanded by Eric Gabe, Yu Wang and Florence Lee in collaboration with Allen Larson. Data collection, extraction and input was performed by John Byron, while Larry edited it. In 1984, the MDF contained 5,600 entries, representing essentially all intermetallic crystal structures solved from 1913 to 1984. The MDF later became NRC's CRYSTMET relational database, developed with the help of John Rodgers, Pierre Villars and Gordon Wood. In those pre-internet days, where email was the fastest way to communicate, CRYSTMET was automated to answer email queries. Nowadays, CRYSTMET is a Windows package that runs on PCs and contains over 128,000 edited entries. It is up-to-date for intermetallic compounds and has been expanded to include inorganic entries as well. Not much of this would exist today without Larry's vision and relentless pioneering efforts.

Larry intensely participated in professional activities. An active member of the ACA, he served on its Nominating and Fankuchen Award Committees. He was Local Chair of the Ottawa ACA meeting in 1970 and a member of the Committee on Standards for the Publication of Powder Patterns. Internationally, he was a member of the Editorial Board of Zeitschrift für Kristallographie. At the IUCr level, he participated in the CNC/IUCr from 1970 to 1976, the last three years as its secretary. In addition to his involvement with Structure Reports, Larry was deeply involved with ICDD. He went on attending their semi-annual meetings until 1993, as Chair of the Metals and Alloys Subcommittee (Wallace & Mueller, 1993).

Larry was Local Chair of the XIIth IUCr Congress and General Assembly at Carleton University in Ottawa in 1981, with Farid Ahmed as Program Chair. This was before the times when congress centers that could professionally handle all daily activities around the meeting sprouted in most big cities. This was also before Internet and even before FAX or email became widespread internationally. Most registration items accordingly had to be handled by steampost, and all accounting was on paper. All accompanying members' activities had to be arranged months ahead of time, with a deposit. With seed money from the IUCr and from NRC, and the support of Ken Charbonneau from NRC's Congress Office, everything went smoothly. The larger-than-anticipated attendance at the Carleton University site even left a very sizeable surplus in the hands of the CNC/IUCr after returning the seed money.

With the CNC/IUCr, Larry went through the patient paperwork of creating a tax-exempt charity CNC/IUCr Trust Fund with the sole function of awarding Student Travel Bursaries to IUCr meetings from the tax-free interest gathered by the IUCr XII surplus money in the fund. This fund has since helped Canadian students to attend nearly all IUCr meetings, usually one, two or sometimes three each time. This fund was renamed the 'L. D. Calvert CNC/IUCr Trust Fund' by a unanimous vote of the CNC/IUCr shortly before Larry died in 1993.

[Larry Calvert, retired, 1993] 1993: Larry Calvert retired in Australia. (Courtesy Barbara Campbell)
Retrospectively, Larry Calvert was a man with vision, attracted by the steady and often thankless effort of huge tasks with lasting value, and preaching only by example. A most careful experimenter with encyclopedic knowledge of metals and alloys, he will probably be remembered scientifically mostly for rare-earth pnictides, for his pioneering crystal-structure database efforts, for his staunch involvement in ICDD and for his role as Local Chair of the XIIth IUCr Meeting in Ottawa in 1981. A new pnictide mineral species, Cu5Ge0.5S4, has recently been very appropriately named calvertite (Jambor et al., 2007) after Larry. He left a scientific heritage of lasting value that has helped put modern crystallography on its tracks. At the personal level, he is remembered as a reserved man with a sharp sense of observation, gentlemanly education and manners, caring for others without ostentation. He will undoubtedly go on doing that for many years to come through the L. D. Calvert CNC/IUCr Student Travel Bursaries he created and funded.
Yvon Le Page

References

Ahmed, F. R., Calvert, L. D., Hanson, A. W. & Przybilska, M. (1981). Acta Crystallogr. A37, 269-269.

Ahmed, F. R. & Le Page, Y. (1993). ACA bulletin, June 1993 p. 9.

Calvert, L. D., Powell, B. M., Murray, J. J. & Le Page, Y. (1985). J. Solid St. Chem. 60, 62-67.

Jambor, J. L., Roberts, A. C., Groat, L. A., Stanley, C. J., Criddle, A. J. & Feinglos, M. N. (2007). Canadian Mineralogist 45, 1519-1523.

Macdonald, M. (1947). The Birds of Brewery Creek. Oxford University Press, Toronto.

Rietveld, H. M. (1967). Acta Crystallogr. 22, 151-152.

Villars, P. & Calvert L. D. (1985). Pearson's Handbook of Crystallographic Data for Intermetallic Phases. ASM International, Materials Park, Ohio. (First edn, 1985, second edn, 1991)

Wallace, P. L. & Mueller, M. H. (1993). Powder Diffraction 8, 73-73.

Mineralogical crystallography in Canada

Canada has a long tradition in Mineralogical Crystallography, and several founding members of the Canadian Mineralogist, a major international mineralogical journal, were crystallographers. Minerals are complicated materials, and work on single-crystal diffraction has gone hand-in-hand with microbeam chemical analysis, spectroscopy, and work on the theoretical aspects of the solid state. Here, I will focus on the last 20 years with some reference to historical provenance.

[Mike Fleet] Mike Fleet, U. of Western Ontario.

Mike Fleet is a geochemist, an import from Manchester (England), who has recently retired from the University of Western Ontario. Mike is interested in basic rocks which host platinum-group metals, the distribution of REES (rare-earth elements) in apatite and synthetic analogues, EXAFS and XANES of sulfide minerals, and the structure of glasses. Although much of this work is not directly single-crystal diffraction, Mike does extensive structure work to provide an atomistic perspective to his geochemical interests.

[Joel Grice] Joel Grice, Canadian Museum of Nature.
[Bob Ferguson, colour] Bob Ferguson, U. of Manitoba.

Joel Grice (after whom griceite, LiF, was named) is a research scientist with the Canadian Museum of Nature in Ottawa. Joel, a native of Ontario, did his PhD with Bob Ferguson at the University of Manitoba on the structures of the Ta-Nb-oxide minerals. He made major contributions to our understanding of borate and carbonate minerals, producing structural hierarchies for the latter two groups of minerals that provide the basis for a structural and paragenetic understanding of the behaviour in rocks. Joel was Chair of the International Mineralogical Association's Commission on New Minerals and Mineral Names for eight years, and was among the top ten most highly cited geoscientists for the decade 1997-2006.

[Lee Groat] Lee Groat, U. of British Columbia.

Lee Groat is professor of mineralogy at the University of British Columbia. Lee did his doctoral work with Frank Hawthorne at the University of Manitoba on the crystal chemistry of vesuvianite. Lee's principal current interest is in the properties and occurrence of gemstones. He has organized many symposia and short courses, and has been closely involved with the current exploration for gem deposits in Canada.

[Frank Hawthorne] Frank Hawthorne, U. of Manitoba.
[Joel Grice and Frank Hawthorne in discussion] Joel Grice and Frank Hawthorne, discussing crystal structures.

Frank Hawthorne [frankhawthorneite, Cu2+Te6+O4(OH)2] is Canada Research Chair in Crystallography and Mineralogy at the University of Manitoba. Frank, originally from Bristol (England), did his PhD with Doug Grundy at McMaster University on the crystal chemistry of the amphiboles. He is interested in the relation between bond topology and energetics in minerals and has developed the idea of structural hierarchies in minerals based on bond topology, and its relation to sequential crystallization of minerals, particularly from aqueous solutions. He has worked extensively on rock-forming minerals (amphiboles, staurolite, tourmalines, micas) using both single-crystal diffraction, microbean analysis (EMPA, SIMS) and a wide variety of spectrocopic methods (infrared, MAS NMR, Mössbauer etc.), and has shown that short-range order is a major feature that controls much of the behaviour of these minerals.

[Grant Henderson] Grant Henderson, U. of Toronto.

Grant Henderson, professor of mineralogy at the University of Toronto, did his undergraduate work in New Zealand and came to Canada to do his PhD with Mike Fleet at Western. Grant has worked extensively on the surface properties of minerals using atomic force microscopy, and is now involved primarily in the structure of amorphous materials, particularly glasses and liquids. He uses EXAFS, XANES, MAS NMR and Raman spectroscopies to elucidate the structures of germanate, silicate and aluminosilicate glasses to derive information on speciation, coordination and linkage.

[Andy McDonald] Andy McDonald, Laurentian U.

Andy McDonald is professor of mineralogy at Laurentian University. He did his PhD with George Chao at Carleton University on the minerals of the Mont Saint-Hilaire intrusion in Quebec, and has worked on the structures of accessory minerals in alkaline rocks, describing several new minerals. Recently, he has been working on the structures of the platinum-group minerals, a broad group of economically important minerals that are the economic source of platinum-group elements, and on the crystal-chemistry of tourmaline-group minerals associated with economic mineral deposits, with a view to developing exploration indicators for platinum-group elements and high field-strength elements (e.g. Ta, Nb).

[Ron Peterson] Ron Peterson, Queen's U.

Ron Peterson, professor of mineralogy at Queen's University, obtained his PhD at Virginia Polytechnic Inst. with Jerry Gibbs. Ron is interested in minerals that occur in mine waste, particularly natural and synthetic hydroxy-hydrated transition-metal sulfates. These structures are particularly sensitive to temperature and ambient humidity, and Ron has constructed apparatus to examine their stability and dehydration/hydration processes as a function of these variables.

[Elena Sokolova] Elena Sokolova, U. of Manitoba.

Elena Sokolova (sokolovaite, CsLi2AlSi4O10F2) is a research professor at the University of Manitoba. Elena was born in Moscow, Russia, and did her PhD with N. V. Belov at Moscow State University on the structures of synthetic borate compounds. Her primary interest is in the structures of Ti-silicate minerals where she has imposed order on a bewildering variety of very complex structures. She has worked extensively on the structures of new minerals from granitic pegmatites, particularly from Dara-i-Pioz in Tadjikistan, and the peralkaline rocks of the Kola peninsula. She also heads a major collaborative project with the Inst. of the Geology of Ore Deposits: Petrography, Mineralogy and Geochemistry of the Russian Academy of Sciences on the crystal chemistry of minerals from the Kola Superdeep Borehole, the deepest hole (12.2 km) ever drilled in the Earth's crust.

Frank C. Hawthorne

For the love of computers in the 1950s

Farid R. Ahmed, Leeds, UK, 1953

[Farid R. Ahmed and Durward W. J. Cruickshank, 1953] Farid R. Ahmed, and Durward William John Cruickshank, U. of Leeds, UK, 1953.

After graduating in 1950 with a BSc Honours in mathematics from the University of Leeds, I wanted to continue my study for a PhD in mathematics. However, the Mathematics Dept. told me to see E. G. Cox, head of the Inorganic and Physical Chemistry Dept. Cox introduced me to Durward W. J. Cruickshank. They explained that they would be interested in having me pursue a PhD degree in crystallography. Durward would be my supervisor, and the title of my thesis would be Development of Mathematical Methods for the Determination of Molecular Structures by X-ray Analysis. I agreed to give it a try.

The first year was spent learning about crystallography and Hollerith equipment (business punch-card machines in the UK) and their use for crystallographic calculations as described by Cox, Gross & Jeffrey (1949). Our use of the Ferranti Mark II electronic digital computer at the University of Manchester started soon after its installation in the summer of 1951. The article by Ahmed & Cruickshank (1953) gives some details of the computer and the crystallographic programs that we devised in that period. They were for the calculation of structure factors, differential syntheses with correction for finite summations as described by Booth, and for the estimation of errors according to Cruickshank. For maximum efficiency, those initial programs were space-group specific. However, sections of the programs could be altered easily to adapt them for other space groups.

The photograph of Durwood and me was taken in 1953 after the farewell party that the Chemistry Department held before my return to Egypt. For the next two years, I taught mathematics to engineering students at the University of Alexandria.

Before 1955, the University of Toronto installed a Ferranti Mark II computer just like the one we had used at Manchester. The X-ray diffraction group at the National Research Council of Canada (NRC) decided to use that computer for their crystallographic calculations. W. H. Barnes and David C. Phillips met in Ottawa with Peter J. Wheatley, who was a crystallographer at the University of Leeds. They decided that crystallographic computing in Ottawa would benefit by bringing in someone with my experience and I received an offer to join the NRC as a postdoctorate fellow for one year. I accepted gladly because of my love for crystallography and computers. My wife Jean and I then immigrated to Canada in 1955.

[Ferranti computer, 1950s.] A Ferranti Model No. 1 computer of the 1950s installed at the U. of Manchester, UK.

The NRC crystallographers got permission to use the Ferranti computer at the U. of T. (FERUT) as much as they needed. At that time, crystallography in Canada was already well established at a few universities and government laboratories. They did powder diffraction and single-crystal analyses of organic and inorganic compounds as well as minerals and metal complexes. Their crystals had varied space groups. It was therefore essential to devise generalized crystallographic programs, which could handle all space groups, and economize on the calculations by taking full advantage of the space group symmetries, and the corresponding structure factor and electron-density expressions, given in the International Tables for X-ray Crystallography (1952). To achieve that, the appropriate equations for the space groups were represented by a simple pseudo code, which directed a short interpretive routine to make the necessary changes to the main program. The article by Ahmed & Barnes (1958) gives some details of the NRC generalized crystallographic programs.

[Authors of NRC software] Co-authors of the NRC FORTRAN package of programs: (top left) William Howard Barnes, second Head of crystallography at the NRC (circa 1966); (top right) Sydney R. Hall (circa early 1970s); (bottom left) Carol P. Huber (photo taken in April 1997) and (bottom right) Margaret E. Pippy (photo taken July 29, 1988).
[F. R. Ahmed, 1997] F. R. Ahmed taken on his 73rd birthday, November 21, 1997.

After FERUT was retired we used computers in Ottawa, starting with the IBM 650 then the IBM 1620, and in each case we used the symbolic codes of those computers. Finally in 1965 the NRC Computation Center installed an IBM 360. This time all our crystallographic programs were written in FORTRAN IV, by F. R. Ahmed, S. R. Hall, C. P. Huber & M. E. Pippy. That was the last rewrite of the NRC generalized crystallographic programs. These programs served us till about 1986. By that time our crystallography group became part of the NRC Institute of Biological Sciences, under the new name of Protein Crystallography Group. Our main research was now directed to the study of macromolecular structures. Computer programs for these studies were imported from other laboratories. The program FRODO for computer graphics was in daily use by our group.

The programs that we wrote in machine or symbolic language lasted for an average of 3.3 years, while the FORTRAN programs lasted for 20 years. The FORTRAN package was also more versatile for distribution to other laboratories in Canada and abroad. The technical advances of the last half century including powerful X-ray beams, automatic data collection with diffractometers/area detectors, and computers with phenomenal speeds, have benefited most areas of crystallography. I consider myself lucky to have witnessed these interesting developments.

I am grateful to Lachlan M. D. Cranswick for inviting me to write this article, and for his help with the Figures.

Farid R. Ahmed

References

Ahmed, F. R. & Barnes, W. H. (1958) Acta Cryst. 11, 669-671.

Ahmed, F. R. & Cruickshank, D. W. J. (1953) Acta Cryst. 6, 765-769.

Ahmed, F. R., Hall, S. R., Huber, C. P. & Pippy, M. E. (1966) NRC Crystallographic Programs for the IBM 360 System, World List of Crystallographic Computer Programs, 2nd ed., Appendix p. 52.

Booth, A. D. (1946a) Trans. Faraday Soc. 42, 444-448.

Booth, A. D. (1946b) Proc. Roy. Soc., A, 188, 77-91.

Cox, E. G., Gross, L. & Jeffrey, G. A. (1949) Acta Cryst. 2, 351-355.

Cruickshank, D. W. J. (1949) Acta Cryst. 2, 65-82.

International Tables for X-ray Crystallography (1952), Vol. 1. Birmingham: Kynoch Press.


Veritas vos liberabit: code of ethics in scientific work

1. Observe conscientiously. Record faithfully. Reason coldly. Infer prudently. State your conclusions courageously.

2. When the investigation is finished, be brave and write it up. Do not 'rush into print', but know when the job is done.

3. Write clearly, with the determination of making yourself understood, not in the hope of impressing people! Look for elegance in simplicity: shun verbiage and pomposity.

4. Be honest in every statement you make. Avoid double talk!

5. Do not bluff your way out of difficulties. Keep your scientific integrity at all times.

6. Do not stop reworking your manuscript until you are sure you can no longer improve it. Watch details too: anything worth doing is worth doing well. Above all: do not expect the referee to clear up your mess for you!

7. Give credit where credit is due. Acknowledge all help you received. Give thanks with dignity. The important point is to say what the person did do for you. (A perfect example: 'Miss Ann Pletinger took all the X-ray photographs.' Bad form would be: 'I am immensely grateful to the gracious and distinguished Miss So-and-so for the invaluable help she gave me in the course of this investigation.')

8. Do not hesitate to ask your professional friends for criticism and advice, as you yourself should be willing to help them at any time. Scientific research is a beautiful co-operative adventure, not a cut-throat business. Professions in which people help one another rate high in the community, in the Nation, and in the World.

9. If you sign a joint paper, you must check the whole paper (repeat every calculation, etc.). If you are not willing or able to go through this checking, then you should refuse co-authorship, and you should sign only that section of the paper for which you are willing to be responsible.

10. When the referees' reports come in, squash your feelings, suppress your passion. Weigh and appraise. Let only your reason decide.

11. Reject the argument of authority (for ten good people can be wrong), but accept the authority of the argument (for one single judicious remark may clinch it)!

12. Have plenty of scientific humility to draw on when you start revising your manuscript. In every instance, make sure that the referee's argument is right, then accept his criticism gratefully, correct the flaw, and sincerely resolve never to make the same mistake again.

13. Be a perfectionist when reading galley proof. If the editor is willing, insist on seeing page proof too, and check that your corrections have been executed.

14. After your paper has been published, an error may be detected in it. Either you find it yourself, or someone else finds it for you. Perhaps a friend of yours writes you a nice letter about it, or a stranger publishes a note to set things straight. In any case, you should be thankful the error was discovered. You must, of course, immediately send an Erratum to the editor, in which you recognize the validity of the criticism. If somebody suggested the correction to you, it is usual to mention him by name. Avoid explaining the mistake away: your fellow scientists are not interested in excuses (they are humans like you, and they too make mistakes); all that matters is the final corrected statement. Remember that your stature as a scientist is not diminished, but actually increased, by your sending in the Errata.

15. Let a cheap politician worry about his 'image'; as a scientist, your only concern is TRUTH.

[Donnay, J. D. H. (1995). Canadian Mineralogist (33/2), inside back cover.]
(reprinted with permission of Canadian Mineralogist editor, Robert F. Martin)

Joseph (José) Désiré Hubert Donnay, born on June 6, 1902 in Grandville, Belgium, passed away peacefully at home, on the flanks of Mont Saint-Hilaire, Quebec, on August 8, 1994. The above, reprinted here with permission of the family, was first circulated to students and colleagues at the Johns Hopkins University in 1965-1966. All of us who worked closely with José know how well he lived by the above Code of Ethics. It does not seem at all out of place to reprint it thirty years later, as a memento to his high standards, and in particular to his sustained efforts in the production of this journal.

Crispin Calvo (1930-1977)

[C. Calvo presenting a prize] C. Calvo presents a prize (a case of Charrington Toby ale) to 'Miss Solidification' who was featured at the open house. Photo from page 86 of the Annual Report of The Institute for Materials Research, McMaster University, Hamilton, Ontario, Canada, April 1970; courtesy of Jim Britten.
Cris and I were classmates at Rutgers in the chemistry department doctoral program. Cris' project involved the synthesis and structures of polyvanadates and polymolybdates. Although he obtained many crystals, they were too complex to be solved by crystallographic methods of the time (early 1950s). We had no computers and all data were obtained by film methods. His PhD dissertation was on the crystallography of the polyvanadates. I believe that he was then a postdoc at Cornell University working on gas phase electron diffraction. He then was appointed as an assistant professor at McMaster University where he spent his entire career.

Cris' major contribution was in doing the crystal structures of pyrophosphates and phosphates of transition metals. There were high and low temperature phases and in special cases plagued with disorder and thermal anomalies in the literature associated with these compounds. Cris solved many of their structures and later refined his own and literature data by full matrix least squares methods. Thus, he was able to clear up many anomalies and to explain the luminescence of these compounds. He systematized the field and was able to predict and synthesize new phases.

Cris and his wife Georgia had five children but unfortunately he contracted Hodgkins' disease. He refused to take the required medication because it restricted his ability to think, a condition he could not tolerate.

Cris was one of the most intelligent individuals it was my privilege to know. He could read J. Willard's Gibbs Thermodynamics in the original as though it was a novel and explain it to you on the spot. In character he was the 'salt of the earth'. His untimely death was a tragedy for his family, friends, and his beloved crystallography.

Abraham Clearfield

To be continued in Volume 18, Number 2.

Crystallography in Canada

continued from Volume 17, Number 4

(This is an extended version of the article that appeared in the printed newsletter)

[CNCC logo]
[Canadian flag]
Lachlan Cranswick was the driving force responsible for generating the Canadian content of these issues. He was a strong believer in the preservation of the history of the development of crystallography and crystallographic computing. He now is a prominent part of the history of Crystallography in Canada.

Early days of protein crystallography in Canada

Crystallographic research in Canada dates back to the 1960s when a number of centres began investigations into various protein structures. At the NRC in Ottawa there was a strong contingent of small molecule crystallographers led by W. F. Barnes. This group included Farid Ahmed, a mathematician trained in D. W. J. Cruickshank's laboratory, Al Hanson and Maria Przybylska, amongst others. Indeed, David Phillips of lysozyme fame worked at the NRC from 1958 to 1960. David developed the spot shape correction equations for upper-level Weissenberg photographs while he was at the NRC. Maria Przybylska embarked on a major protein crystallography project, that of the complex between hemoglobin and haptoglobin in the early 1960s; unfortunately, the structure was not solved for many years.

The University of Toronto was also a hub of small molecule crystallography, with Stan Nyberg in the Chemistry Department and Norman Camerman in the Biochemistry Department. Theo Hofmann, in the Biochemistry Department at the University of Toronto, isolated an aspartic proteinase from the fungus Penicillium janthinellum. He named it penicillopepsin. Theo characterized penicillopepsin biochemically and kinetically and he recognized the importance of structural data in order to bring these facts together and to understand the catalytic mechanism. Theo grew the first crystals of penicillopepsin and began a collaboration with Stan Nyberg on the structure. Data collection was performed in Nyberg's laboratory on precession photographs and a postdoctoral fellow, I-Nan Hsu, carried out that initial work. The work was susequently transferred to the University of Alberta in the mid 1970's.

The other major crystallographic centre in Canada of the time was in the Chemistry Department at UBC. Jim Trotter, an organic chemist and a small molecule crystallographer, headed up the lab; he was trained in Scotland with J. M. Robertson. Jim's main interests remained in the field of small molecule studies, as opposed to protein crystallographic studies.

In addition to Cambridge's Laboratory of Molecular Biology, Dorothy Hodgkin's laboratory in the University of Oxford was also a Mecca for those wanting to learn the methods of protein crystallography. Two Manitobans were privileged to study with Dorothy in the 1960's, Carol Saunderson and myself. I arrived in Oxford in 1963 just as Carol was graduating from Oxford with her DPhil. Carol returned to Canada and went to the NRC labs in Ottawa, where she eventually became involved in protein crystallography and specialized in the cathepsins, a group of lysosomal proteinases that resembled the plant enzyme papain.

Although I did not work on the insulin project while I was at Oxford, I did catch the bug to work on the structures of proteins. This occurred in 1965, when I traveled with two fellow researchers from Dorothy's group, Ken Watson and Tony Cooper, to London to attend the unveiling of the lysozyme structure at the prestigious Royal Institution. David Phillips headed the team of researchers that solved this structure at 2.0 Å resolution. Included in the Phillips' team were Tony North, Colin Blake and Louise Johnson. This really was an inspirational experience, to see the structure of hen egg white lysozyme, the first enzyme to have its structure determined. In addition, this research inspired many others to work on the catalytic mechanism of an enzyme that had a three-dimensional structure available. I was determined to work on the structures of enzymes from that day forward.

In December of 1966, I returned to Canada and joined Dave Hall in the Chemistry Department at the University of Alberta. Dave was a small molecule transition metal crystallographer who was starting one of the first crystallographic laboratories in Alberta. Also present in the Chemistry Department was Ray Lemieux, one of the world's leading carbohydrate chemists. I had the good fortune to work with Ray as a postdoctoral fellow in Dave's laboratory on structures of small monosaccharides with a variety of halo-substituents on the C1 atom of the pyranose ring.

In late 1967, I received a phone call from Larry Smillie and Cyril Kay, both in the Biochemistry Department at the University of Alberta. Cyril and Larry wanted to start a protein crystallography group to assist in structural studies of molecules in which they were interested. Having obtained my name from Manpower Canada under the job category of 'crystallographer', Larry and Cyril invited me to join the Department of Biochemistry, provided I received a scholarship from the Medical Research Council of Canada (MRC) to support my research and salary. After being successful with this MRC application, I started my forty-year long career in the Department of Biochemistry in July 1968.

Larry Smillie provided me with a highly purified sample of α-lytic protease, an enzyme from the soil bacterium Lysobacter enzymogenes. We managed to crystallize it in a trigonal space group and with my first postdoctoral fellow, Michael Joynson, who had done his DPhil at Oxford with Louise Johnson, we set about to determining its three-dimensional structure. This was an interesting and exciting project because Larry had just finished determining the amino-acid sequence of the protein and had shown that it was closely related to the mammalian enzyme α-chymotrypsin. In order to show the evolutionary relationship between these enzymes, it was important to determine that it had a similar tertiary structure. Eventually we showed that it did!

[SGPB in 1975] SGPB in 1975
[SGPB in 2007] SGPB in 2007

The first protein structure determined in Canada was done in my laboratory in Alberta. SGPB is the B protease, a proteolytic enzyme from the soil bacterium Streptomyces griseus, and closely related in sequence to α-lytic protease. The paper describing the molecular details of the 2.8 Å resolution structure was published in Nature in 1975. SGPB had the same disposition of aspartate, histidine and serine residues as did α-chymotrypsin. It also had the two beta-barrels that constituted the major fold of the molecule. SGPB and α-chymotrypsin were clearly related evolutionarily, even though one was from a cow and the other from a bacterium. Other proteolytic enzymes from Streptomyces griseus that our group solved were SGPA and the trypsin-like enzyme, SGT. SGPA constituted the major part of the work that Gary Brayer did for his PhD thesis and Randy Read did the work on SGT for part of his PhD thesis research. Many other people played major roles in the early stages of our protein structural studies: Penny Codding, Wendy Hutcheon, Masao Fujinaga, Louis Delbaere, Bill Thiessen and the biochemists who isolated and purified the original enzyme preps, Lubo Jurasek, Larry Smillie and Peter Johnson.

The structure of penicillopepsin, determined by I-Nan Hsu in collaboration with Theo Hofmann's group at the University of Toronto in 1976, produced a great deal of excitement because it brought with it the structural data that would aid in interpreting the catalytic mechanism of this family of enzymes. The aspartic proteinases are so-named because they have two aspartic acid residues in an amino-acid triplet of Asp-Thr(or Ser)-Gly at the active site. This family is medically important because two of the members are kidney renin, an aspartic proteinase that is critical in the regulation of blood pressure, and HIV proteinase, an enzyme that is crucial for the replication and 'life' cycle of the HIV virus. Because of the medical importance of these two enzymes, they rapidly became key targets for the development of inhibitors, in the regulation of blood pressure and as antiviral drugs. These were certainly very 'heady' days in the field of structure-based drug design and many of those suffering today from AIDS have benefited tremendously from this research.

Other leading protein crystallographers in the Department of Biochemistry at that time include my friends and colleagues Bob Fletterick and Wayne Anderson. When the MRC Group in Protein Structure and Function was formed in 1975 we hired a second crystallographer, Bob Fletterick. Bob had done a postdoctoral fellowship with Tom Steitz at Yale, where he worked on the structure of hexokinase. When Bob moved to Edmonton he worked closely with Neil Madsen on the structure of rabbit muscle phosphorylase a. Bob worked diligently on the solution of this structure and collected a data set every day (remember this was before the days of flash-cooled crystals) in order to get suitable heavy-atom substituted crystals to solve the MIR phase problem. Two very capable postdoctoral fellows helped Bob in this task, Jurgen Sygush and Steve Sprang. Together this team solved the structure of phoshorylase a and used the structure to interpret many of the details of the catalytic mechanism. The sugar binding sites for the glycogen molecule were visualized and the pyridoxal phosphate bound to lysine was identified. This was a momentous achievement in these early days of protein crystallography.

In 1979 Bob left for San Francisco, where he set up a crystallographic laboratory that is still highly productive. Jurgen Sygush went to the Université de Sherbrooke and set up his laboratory there in 1978. In 1979, Steve Sprang joined Bob in San Francisco. Eventually, Steve established a Howard Hughes structural biology unit at the University of Texas Southwest Medical School.

Wayne Anderson, who also graduated from Tom Steitz' laboratory in Yale, came to the MRC group after a postdoctoral stint in Brian Matthews' lab at the University of Oregon in Eugene. Wayne brought a different interest to the Department. He was part of the team that solved the structure of the DNA binding protein CRO. This structure revealed a paradigm for protein-DNA interactions, that of an α-helix binding in the major groove of the DNA double helix. Interestingly, this binding mode had been predicted by Gordon Dixon, a biochemist at the University of Calgary. Wayne's interests were many and varied. He worked on Fab fragments of monoclonal antibodies that had been raised against DNA. This was an excellent model for the autoimmune disease Lupus erythromatosis. With Wayne's help, we were successful in purchasing one of the first multiwire detectors from Ron Hamlin in San Diego. This was a huge advance in the data collection speed in Alberta and we used it to tremendous advantage. Wayne was at Alberta for nine years before moving on to Vanderbilt University in Tennessee. Wayne and Bob both left tremendous legacies at Alberta and we owe them a great debt for their teaching and their research.

The 40 years that I have been a member of the Department of Biochemistry have been truly rewarding. I owe a great debt to all of those who have supported me in my various projects of structural biology. I want to thank Michelle James for typing this manuscript. I have been fortunate to have received funding from a variety of agencies over the years, the MRC of Canada, CIHR, AHFMR, the Canada Research Chairs program and CFI among others.

Michael James

Eric Gabe

[Eric Gabe 1957] Eric Gabe (1957)

I graduated from Cardiff University with a BSc in 1957 and went on to postgraduate work in crystal structure analysis under the direction of D. F. Grant, obtaining a PhD in 1960.

During that time computers were becoming available and it was possible to attempt three-dimensional analysis of medium-sized organic compounds for the first time, though it was a very tedious process. There were no integrated systems for structure analysis and it involved the use of several different computers. Thus, the output from a structure-factor calculation on one computer was incompatible with calculating a Fourier map on another computer, and would require manual re-typing of the required paper-tape input. Time on the computers, which were in different cities, always seemed to be allotted to crystallographers during the night. At five in the morning, realising that the paper-tape going into one side of the reader was not emerging on the other, was not the happiest experience. Typically, the whole process might take a year.

I then moved to the Pure Physics Division of NRC in Ottawa as a postdoctoral fellow under W. H. Barnes, though I worked mainly with Farid Ahmed using programs which he had written for an IBM 650. After a brief stint in London using a Ferranti Mercury machine - from midnight to 6 am - I moved to A. L. Patterson's lab in Philadelphia where I wrote many programs for the in-lab IBM 1620, a rather strange machine which used a decimal structure rather than binary.

In 1966 I moved back to Ottawa and became involved in the automation of a Picker diffractometer in the Mines Branch labs of the Department of Energy, Mines and Resources, the first such machine in Canada. This work used a DEC PDP 8 minicomputer and, because of its speed, I was able to use the otherwise idle computer time while the instrument was scanning a reflection to calculate absorption corrections by Gaussian quadrature. This led me to realise that such machines could be used for all aspects of structure analysis. In 1972 I moved back to the Chemistry Division at NRC and began work on what ultimately was to become the NRCVAX package. The first programs were written in machine code for the PDP 8e computer, the basic version of which had 4 K 12-bit words and a 1 microsecond cycle time. It was possible to add more memory, up to 32 K, at great cost, but the only auxiliary storage available was on magnetic DEC tape, which was very slow. Fortunately, in about 1969, DEC introduced the OS 8 operating system using a 1.6 mega-word disk and a Fortran compiler with an excellent overlay structure. In my opinion, this single-user operating system was far better than many later systems. Working in collaboration with D. F. Grant, A. C. Larson, Yu Wang and P. S. White, we were able to develop a complete Fortran package for data collection and analysis using the PDP-8e. Initially, floating-point operations used software emulators and calculations were rather slow. However, the introduction of floating-point hardware speeded things up enormously and it became possible to solve and refine a 20- to 40-atom structure in less than a working day. The only real restriction was caused by the size of the memory in full-matrix calculations and block-diagonal methods were used.

The diffractometer program DIFRAC migrated to control CAD-4 machines using PDP 11 computers and the analysis package moved to the PDP 1160. Memory size still imposed a limit on full-matrix least-squares and, in fact, was more severe on the PDP 11 than on the earlier and seemingly smaller machine, because of the less efficient overlay scheme. In the early 70s most structure analysis was done on large mainframes and many people had difficulty in believing that it could be done on in-lab minicomputers. I remember being told at a meeting that such things could not be done on a PDP 8!

When the system moved to the PDP 11 we encountered portability problems, with compiler inconsistencies and different input/output handling. Programs were modified accordingly, but we realised that the code needed to be made more portable. When the system migrated to the DEC VAX in the mid-70s (and to the increasingly available PCs using Windows), size restrictions were removed and the code itself was revised to use a safe subset of Fortran 77, sometimes referred to as 'pidgin' Fortran. Areas where compilers in different machines still caused problems were isolated to a small set of routines which could be controlled by system-specific parameters. These include graphics, input/output, Boolean and time/date routines. In this way potential problem code can be isolated and easily dealt with if the need arises. The infamous, and grossly overstated, Y2K problem was dealt with by changing one line of code. The NRCVAX system is not, and was never meant to be, a 'black box', though it can be used quite successfully with the built-in defaults. Users with crystallographic knowledge however, can use the many options available to solve and refine difficult structures.

Eric Gabe

Osvald Knop

[Osvald Knop] Osvald Knop

One of the first to do crystallography in the Maritime Provinces was Osvald Knop (Ossie). Born in 1922, he arrived in Halifax in 1949 via Mazarek University in Czechoslovakia, Sweden, a spell at Cal Tech with Linus Pauling and Laval (DSc 1957). At Cal Tech, Ossie worked on intermetallic phases attempting to solve the three-dimensional structure of Co2Na using a Hollerith Punch Card adaptation of Beevers-Lipson strips. A similar machine was installed in the basement of the Mathematics Inst. in Oxford. It was powered by a multi-horsepower diesel motor, which was started by a crank handle, and when it ran (night only) the whole building shook. In Halifax with Ossie there was also Karoline (Lottie) Castelliz, who received her PhD in Vienna in 1932.

In Halifax Ossie first worked on the three-dimensional structures of the lycopodium alkaloids, although once his work showed progress other groups with greater resources and deeper pockets took over. His other major interests were metal oxides, sulfides and intermetallic phases. The early equipment consisted of a Solus Schall generator - with a pre-war model plate - and a band-driven Weissenberg camera. The generator, still faintly working, departed to the dump only 10 years ago - the transformer oil containing no trace of PCBs. The camera still exists; those who remember this model will not be surprised to learn that it is now exhibited as a memorial to the misery of working with a badly designed instrument.

Ossie and his students produced many elegantly accurate phase equilibrium diagrams, some with neutron diffraction data (he was the first to use Chalk River for diffraction experiments). The three main furnaces for this work - constructed by Ken Reid - were called Faith, Hope and Charity and survived in working order for many years. Ossie's time in Halifax included 7 years at Nova Scotia Technical College and many years at Dalhousie. He retired in 1990, became an Emeritus Professor and still comes into the lab most days of the week.

T. Stanley Cameron

QTAIM: quantum theory of atoms in molecules

[Representations of guanine-cytosine pair] Three representations of the structure of the guanine-cytosine base pair: (a) classical structure; (b) the network of bond paths linking neighbouring atoms that defines the molecular graph; (c) contour map of the electron density, showing the bond paths and the intersections of the zero-flux interatomic surfaces with the plane of the diagram. The atomic symbols in (b) denote the positions of the nuclei: H (white),C (black), O (red), N (blue). The small yellow dots denote ring critical points, the red dots the positions of the bond critical points: the origin of the unique pair of trajectories of grad ρ, each of which terminates at a neighbouring nucleus, and the terminus for the set of trajectories that define the interatomic surface. There is a wealth of information in the molecular graph. Note that it provides a faithful mapping of the classical structure onto the topology of the density, showing in addition to the three hydrogen bonds a weak interaction between a methyl H and the keto O in cytosine that is not indicated in the classical structure. The presence of the bond path is but a useful way of depicting and summarizing which pairs of atoms share an interatomic surface, as demonstrated in (c). That this shorthand notation mimics the way in which the same information is conveyed by the structures that evolved from experimental chemistry is surely one of the most powerful of all the physical vindications of the zero-flux boundary condition for the definition of a quantum open system.

Science is based on observation. Among the most important of the quantities accessible to measurement is the distribution of charge - nuclear and electronic - that constitutes matter and determines its properties. We are indeed fortunate to live in an age wherein the accurate measurement of charge distribution became a reality, with each year witnessing an increase in our technical ability to determine its form and interpret its physical consequences.

The topology of the charge distribution is dominated by the electron-nuclear force, causing the electron density ρ to exhibit maxima at the nuclear positions, thereby imposing the atomic form on the structure of matter. The resulting topology of the electron density provides the physical basis for the partitioning of space into atomic regions. The connectivity of the atomic regions defined by the lines of maximum density linking neighbouring atoms - the bond paths - yield all of the structural concepts of chemistry: open, cyclic and cage structures. Changes in the topology of ρ occasioned by motions of the nuclei cause changes in structure, yielding a theory of both structure and structural stability.

The primary purpose in postulating the existence of atoms in molecules or crystals is a consequence of the observation that atoms or functional groupings of atoms exhibit characteristic sets of static, reactive and spectroscopic properties which in general vary between relatively narrow limits. Thus, the knowledge of chemistry is ordered, classified and understood by assigning properties to functional groupings of atoms, properties which are then used to identify the presence of a given group or to understand the behaviour of some total system. It follows that the topological definition of an atom in a molecule is of no physical substance unless it enables the extension of quantum mechanics to an atom in a molecule, enabling the definition of its properties. The necessary boundary condition for the extension of quantum mechanics to an open system - to an atom in a molecule - is a natural consequence of the topological definition of an atom as determined by the dominance of the nuclear-electron force. An atom is a region of space bounded by a surface not crossed by any gradient vectors of the density, a 'surface of zero-flux in grad ρ'. The resulting theory is called the quantum theory of atoms in molecules, QTAIM. As is well documented, the atomic and group properties predicted by QTAIM agree with the additive group contributions measured experimentally, agreement with experiment being the only test of theory.

QTAIM, by providing the quantum basis for an atom in a molecule, necessarily recovers all of the related concepts of experimental chemistry. Thus, in addition to the definition of atoms and molecular structure, QTAIM provides the physical basis for the Lewis model and its associated chemical concepts. The pairing of electrons and the associated concepts of electron localization/delocalization, are determined by the atomic expectation value of the exchange density and given physical expression in the topology of the Laplacian of the electron density, the quantity .2ρ.

Thus, the measurable electron density provides the link between the primary concepts of experimental chemistry and quantum mechanics, providing the prediction and understanding of the properties of matter at the atomic level. It is to be understood that every question capable of expression in terms of quantum observables - energy, force, pressure, current etc. - can be both asked and answered. QTAIM provides an entirely new way of asking and answering questions concerning structure and its relation to measured properties that previously were matters of intense debate, the very definition of structure - of bonds being present or absent - being a source of controversy. Now it only remains for the investigator of the density to ask proper and meaningful questions.

The acceptance by the experimental community of the topological theory of structure was not immediate. One could not find in the displays of the total density the accumulations of density corresponding to the bonded and lone pairs anticipated on the basis of the Lewis or orbital models. The field of accurate determination of ρ was instead dominated by the construction of density difference maps, Δρ, obtained by subtracting the promolecule density ρo from the 'true' density ρ determined by a modelling of the measured structure factors. An interatomic surface defining the common boundary of two bonded atoms cuts a 'bond' (as depicted in the Δρ maps) in two, making it difficult for some to accept that the primary structural unit is the atom, not the bond, and thus to turn the equation around to study ρ = Δρ + ρo rather than Δρ.

The turning point in the acceptance of the topological theory of structure by X-ray crystallographers came with the demonstration that the topology of the Laplacian of the density provides a remarkable pictorial mapping of the Lewis electron pair concept onto real space, the bonded and lone pairs being defined in terms of concentrations of charge appearing as local maxima in .2ρ. This work was presented at a GRC on electron density and bonding in 1983. The topological properties of the Laplacian have been shown to be a direct consequence of the properties imposed by the Pauli principle on the pair density and on real space through the spatial localization/delocalization of the density of the Fermi hole. With the Laplacian providing a bridge between the old and the new, the topological theory of molecular structure rapidly gained acceptance to reach the dominant position it enjoys today amongst an ever growing audience of chemists and, in particular, X-ray crystallographers. An interested reader may view a video of a talk reviewing the development of QTAIM that I presented last January in the 'Frontiers in Chemistry Series' at Case Western Reserve University, to be found at: http://www.chemistry.mcmaster.ca/faculty/bader/

Richard F. W. Bader

Comments on QTAIM

The QTAIM approach to the examination of electron density has provided crystallographers with a remarkable tool to examine, experimentally, the fine details of the electron density throughout a crystal. Our group here at Dalhousie has been specializing in the collection of high-angle low-temperature multi-redundant X-ray diffraction data to examine the weak interactions present in crystals. In a series of papers, we are beginning to see that, although many of the C-H...X and even H...H interactions are weak, they are, with the insights from QTAIM, clearly detectable. Moreover, for many of these weak interactions it begins to appear that they are far more logically organized that was ever suspected. The result is that the species in crystals are often held in place not just by the familiar conventional forces but also by a multitude of Lilliputian tethers.

T. Stanley Cameron

A life in science

[Booth with digital multiplier] Andrew Booth working on a digital multiplier

A few words of introduction. I am the last surviving member of the group of X-ray crystallographers who worked in the Chemistry department at Birmingham University in the early 1940s. The Chairman was Sir Norman Haworth, who won the Nobel Prize for his determination of the molecular structure of ascorbic acid (vitamin C). X-ray crystallographic work was under the direction of E. Gordon Cox (later Sir Gordon), lecturer in Physical Chemistry.

I had studied medicine and theoretical physics at London and done an engineering 'graduate training' course at my father's aero engine shadow factory in Coventry. This was followed by several short-term wartime jobs. These included one to set up an X-ray inspection laboratory at the Armstrong Siddley Aero engine works in Coventry. I did not find industry very interesting and applied for an advertised Graduate Scholarship awarded by the British Rubber Producers Research Association (BRPRA) to work at Birmingham University on rubber structure. My father was of course livid, because accepting the Scholarship involved a reduction in income by a factor of six. The Wartime Scientific Assignment Board had to be consulted, and agreed with the additional constraints that I had to be OC Air Navigation at the Birmingham ATC training centre several evenings per week.

By the time I arrived at the lab the government had re-assigned the X-ray group to work on explosives, in my case penterythritol tetranitrate (PETN), C-(CH2ONO2)4, and a substance named RDX. I met with Cox for about an hour and was given a stack of paper. This included some of Cox's own work and Bernal's classic 'Chart' paper. I was told 'Find 26 errors in this'! Next, Cox led me to the actual X-ray lab. He located a large and filthy wooden box and said 'This contains an X-ray tube, get it going'. I did not see him again for 18 months, as he had moved to an administrative post at the Ministry of Supply.

[Booth and Birmingham colleagues] Left to right back row: Williamson, Booth, Llewelyn; front row: Boyle, Claringbull, Small. From roof of Birmingham Chemistry Building, 1942.

The staff in charge of the unit were now Frank Llewellyn and George Claringbull. My immediate contact was George Jeffrey, whom most crystallographers will still remember. I soon assembled the contents of the wooden box. It was indeed a home-made X-ray system, but a previous student had contaminated it with mercury. The whole thing was assembled using APESO wax. I was told later that the unfortunate man responsible was kicked out. I was now introduced to the Phillips sealed-tube unit, which was the one actually used.

Next, there were training sessions on space-group determination using such simple crystals as oxalic acid, easy structures such as NaCl, and eventually a gathering of data for PETN. Once the diffraction films were made and analysed, the next operation was the determination of absolute intensities using the Lindeman electrometer, a most revolting and temperamental device.

Finally, the data were taken to the calculating room where, with the aid of models, one attempted to see how best the proposed structure could be fitted into the unit cell. This was a frustrating process for which one used Patterson syntheses and Beevers and Lipson strips, along with Brunsviga and Facit hand calculators. Although we had an assistant to do some of the routine work, I soon became frustrated and devised some mechanical aids. Fortunately I was able to get these made at the BRPRA workshop. The work now went more smoothly and the structure was soon finished. I was then diverted to other problems such as isotope separation and other wartime needs.

Before leaving the subject of our group, two remarks may be of interest. First, youthful desires. Each morning, Llewellyn and I used to take the same electric tram from central Birmingham to the University. There was a particularly beautiful lake on the approach drive, with a fine display of daffodils in springtime. As we passed the lake we would exchange philosophical thoughts. Llewellyn expressed an eternal love for Science and a determination to make it his life work. It is interesting to find that his first move was to a Chair in Chemistry in New Zealand and then to head the NZ Broadcasting Commission. This was followed by a move back to the UK, Directorship of the British Council, and a Knighthood. Claringbull, too, soon left crystallography to become Sir George, and Director of the Geological Museum in London.

The second observation is the behaviour of Professor Haworth. Each evening at 5pm he would wander round the labs and ask each research student 'What have you achieved today?' Next morning, soon after 9am, he repeated the process with 'What have you achieved since I last saw you?' I have found this a most useful technique.

With my PhD in hand my scholarship ended and I moved to the BRPRA laboratories near London. The Director, J. W. Wilson, proved to be one of the best people for whom I have worked. My interests were in improving the understanding of the X-ray analytical process and in improving the computational techniques. Wilson gave me a completely free hand and I worked 12 hour days, and also acted as Air Raid Warden and Fire Watcher. Meals were taken at the nearby 'British Restaurant', which provided good and inexpensive food.

I designed and put into construction a large mechanical structure-factor calculator and also a relay Fourier synthesiser. On the theoretical side, I started on the development of error and accuracy analyses for the results of current X-ray analyses.

The resulting papers from this work soon attracted some attention and I was offered a Nuffield Fellowship and Lectureship in Physics at Birkbeck College, London, under the leadership of Desmond Bernal. At that time, Bernal had no College space for his new 'Biomolecular' laboratory, so his initial team was housed in the Davy-Faraday laboratories at the Royal Institution (RI). As my practical program was proceeding at BRPRA I spent most of my daytime in the splendid library of the RI, writing my book 'Fourier Technique in X-ray Organic Structure Analysis' (Cambridge University Press, 1948), where references and details of most things mentioned above can be found. I also taught Optics and Theoretical Physics at the old Birkbeck building in Bream Street.

[Bernal team] The Bernal team, 1948. Left to right, back: Aaron Klug, Jeffrey, Hirsh, Pit, Helena Scouludi; front: Anita Rimel, Ehrenberg, Desmond Bernal, Helen Megaw, Carlisle. Missing: Booth away in USA.

Following a visit to the USA in 1946 to attend the first ASXRED conference at Lake George, I visited most of the computing facilities and, on return to England, terminated the work on the mechanical Fourier machine at BRPRA and started on an all-electronic version. Meanwhile, I had been awarded a Rockefeller Fellowship, which I used to work with von Neumann at the Institute for Advanced Study in Princeton. While there I designed two general-purpose computers, the ARC and APEXC. The former was an all-parallel binary machine on the von Neumann plan, to form a test-bed for memory development, the second my own architecture and serial operation for X-ray calculations. Meanwhile, I was testing various forms of magnetic memory.

[Kathleen Britten and Xenia Sweeting] Kathleen Britten (left) and Xenia Sweeting (right).

On return to England my two assistants, Kathleen Britten and Xenia Sweeting, soon constructed the ARC and I had an operational magnetic drum memory (now in the Science Museum, South Kensington). Bernal now had his new laboratory building and his new Biomolecular lab was opened with myself as assistant Director for Computing.

Over the next few years, the APEXC design was given to International Computers Ltd. in exchange for generous financial support for my laboratory, which became the foundation of the world's first Department of Computer Science in 1953. It is still in existence.

[Andrew Booth and Kathleen Britten] Andrew Booth and Kathleen Britten working on the 1st decoder for their X-ray calculator.

My 17 years of work had resulted in the generation of some decent methods for calculating atomic coordinates from Fourier syntheses, together with methods to assess their accuracy. The computer work had generated a series of methods that it was hoped would, at least partially, automate the whole process for small molecules. Quite apart from this, I had initiated the whole field of computer-aided language translation, as well as the use of computers for the chronological dating of ancient and other texts. On the experimental side, research was in progress on ferro-electric materials and on thin-film magnetics.

I had made several attempts to get the University to create a permanent Chair in Computer Science, and even obtained a guarantee of funds from industrial friends to support it. It was rejected on the grounds that 'It is too soon to see if computer science will have a long term existence'! It must be said, however, that this may have been due to the malice of another academic at another university. I learned of this much later, along with evidence of his complete dishonesty.

In 1962, I decided to leave the Socialist mediocracy that Britain had become. When I let this be known I had some immediate offers, one from Western Reserve University, Cleveland, and another from the University of Saskatchewan. Western Reserve offered an 'Interdisciplinary Professorship in Autonetics' a title which the then Chancellor, Jack Millis, constructed from Greek roots as 'Doing what you like'. Saskatchewan, however, wanted someone who would modernize the College of Engineering and get it involved in research. I thought this very interesting and eventually accepted the Chair of Electrical Engineering, with the expectation of succeeding the then Dean of the Faculty when he retired in 1963. I kept the Cleveland offer on hold and accepted it in 1963 as a 'professor at large'.

The University of Saskatchewan was founded in 1909. The College of Engineering consisted of Departments of Agricultural, Civil, Mechanical, Chemical and Geological Engineering. The first year enrolment was about 1000, mostly male. None of the departmental Chairmen had doctoral degrees and there was practically no research.

In my first year I started a number of projects, including the design and construction of a fully transistorized version of the APEXC. With excellent financial assistance from the Canadian National Research Council and the Defence Board, this machine was completed within the year. By now I had discovered that no university in the Prairie Provinces had any interest in X-ray structure analysis so that, apart from some small investigations which I used as tests, the machine was used for biomedical and other data acquisition. I am happy to say that the machine operated without maintenance or error for over a decade.

I introduced student participation in college government long before the riots of the 1960s. Thus, when the troubles started, the engineers were a steadying influence on campus revolt. I also introduced structural changes: a Division of Hydrology and a Division of Biomedical Engineering, the latter arising from my early medical training. One result was that MD's could obtain an engineering degree in three years and engineers an MD in the same period. It is interesting to note that, in my time, several engineers obtained the MD, while no MD completed the course. My own contributions were the first demonstration of cell damage due to microwaves, hyperbaric oxygen in wound treatment, laser eye surgery and open-heart surgery. By the time I left Saskatoon in 1972 I had a reasonably qualified staff and a graduate school enrolment of about 300. This was the fourth largest in Canada. On the side, our work on MT had continued under the supervision of Kathleen Booth and our system had been demonstrated to the Queen's Printer.

I should have been happy to stay at Saskatchewan until my retirement, but out of the blue came the offer of the Presidency of Lakehead University in Ontario. This was a new University with splendid buildings. Unfortunately, the first President had resigned in the face of student protest. My mandate here was to stabilize the faculty and students, to introduce research and, as I had not been told before I accepted the post, to balance the budget. I managed to do most of these things before I retired in 1978. The exception was research: at no time were there funds to make the necessary new appointments.

In the very limited spare time I had available I had kept in touch with the area of small computers, so, when a curious little device called the KIM became available, I acquired one. Visitors were amused to see the machine set up on a side table in my office. I also got one of the first TI60 programmable pocket calculators with associated printer unit. I spent a happy Sunday afternoon programming it to calculate and print all of the F(h,k,l) values for PETN from the coordinates in our original paper. It was about ten times faster than the months of work in the 1940s.

On retirement in 1978, we moved to BC. Here, we set up a small Company and, with a grant from the National Research Council, designed and produced an energy-control device and software to economise on electrical domestic power use. We showed that our interface, used on the PET computer and tested over a 12-month period, could reduce the power bill by 30%. We had hoped to market this but had no sales acumen and failed, although we disposed of a number of units to various university and government departments as an interface from computers to the real world.

I also used the PET to automate a Fourier refinement of the original PETN coordinates. The program was written in BASIC and the results cleared up several anomalies that we had detected in the original work. It also agreed with previous work at UBC.

I became an honorary scientist at the Institute of Ocean Sciences at Patricia Bay, Sidney, BC, and designed a correlation sonar to be used to determine sub-surface ocean currents. This was successfully constructed at IOS and has produced useful results. Other projects include computer recognition of marine animal sounds and the computer translation of ancient maps to modern format. Our main activity, however, has been a study of waves in the ocean, and particularly the transport of atmospheric CO2 to the water for absorption. This has led to a number of interesting sidelines, although the work has now ceased because of a lack of government support for the institute.

Other contributions are in the fields of photometric evaluation of coal deposits, and the design and insertion of corneal implants. Finally, I designed and implemented a course for engineering students entitled 'Economics and Business Management for Engineers'. This was given for a number of years at the University of Victoria and resulted in a small book of the same name. The emphasis was on computer modelling and, among other things, one of the exercises for students was to design and use an extended version of the J. W. Forrester Club of Rome model. The interesting outcome is that disaster looms by 2025 even without global warming.

I am still very interested in mathematical crystallography and often return to several problems from my early days: uniqueness of the solution in the absence of phase information and the general problem of phase determination.

Andrew D. Booth

19th century basics spearhead 21st century progress: some autobiographical details

[NRC award for research excellence] The team of ICPET (Institute for Chemical Process and Environmental Technology) and IRC (Institute for Research in Construction) crystallographers receives an NRC award for Research Excellence on April 28, 2008. Front: Isobel Davidson, Pierre Coulombe (NRC President), Pamela Whitfield. Back: Yvon Le Page, Patrick Mercier, Lyndon Mitchell. (Credit for photograph: National Research Council of Canada).

This is the 'MISSYM story', as suggested by the Editor of this Newsletter issue. This very simple and small part of my work at NRC is now used to delegate so much quantum-modeling brainwork to computers that it may be worth consigning the sequence of concepts and events onto paper.

In the fall of 1976, I was a postdoc with Gabrielle (Gai) Donnay (Martin, 1989), a diffractionist with great reputation and a crystallography professor at the Geology Department of McGill University. Her husband, Joseph (José or JDH) Désiré Hubert Donnay (1902-1994, see Donnay, 1962; Le Page, 1994) was Emeritus. JDH was a legend of mineralogy, crystal morphology and twinning. They occupied facing desks in the same office. Together, they were a formidable team, essentially an encyclopedia of mineralogy, crystallography and diffraction. I had been assigned the task of teaching the yearly undergraduate crystallography course to students from physics, chemistry and geology departments, while the Donnays were away on and off, a couple of weeks at a time, during a sabbatical year. Under any circumstances, teaching such a spectrum of nearly 40 undergraduate and graduate McGill students would have been a daunting task for any recent PhD in Physics. Knowing that the lecture notes would be under the microscope of the Donnays each time they came back unannounced made things really daunting.

Maybe the very first theorem stated after definitions in any decent crystallography course is the Primitivity Theorem: a cell based on three shortest (meaning that none is shorter) non-coplanar lattice vectors is primitive. I tried to work out a simple proof for the lecture notes and failed. The theorem was printed in textbooks by Buerger, Friedel etc., but without proof. I knocked on JDH's door and asked what classroom proof he used for this theorem. Tall, straight, alert and friendly at 74, he was known to be the most knowledgeable living person for anything about geometrical crystallography. 'Aaah, celui-là ...', he said, hinting that something was ajar: even Bravais (1850), who had proved everything else, had not printed a proof for it, but was instead referring to a very complicated algebraic proof in a book printed twenty years earlier and that could not be found anymore. JDH knew of other proofs as well, but all complicated and not suitable for teaching. I was extra careful to prove everything else, including the existence of seven crystal systems and no more, a fact that is usually taken for granted. The students were great and interested. Nobody dropped from the course or flunked the final exam on both geometrical crystallography and X-ray diffraction, to the amazement of the Donnays, who actually checked that the exam books at the bottom of the graded stack were up to their specs for graduation.

My second postdoc was at the NRC's X-ray diffraction laboratory at the Chemistry Division in Ottawa, starting in 1977, working with Larry Calvert, Eric Gabe, Allen Larson and Yu Wang on the nuts and bolts of what would become the NRCCAD Fortran diffractometer program, the NRCVAX structure package and the CRYSTMET crystal structure database. The IUCr XIth Meeting in Warsaw in 1978 allowed two contributions, provided that one would be in the session on 'Crystallographic Teaching'. In addition to a poster on least-squares weights in accurate refinements, I contributed the short 1976 proof for the existence of no more than seven crystal systems as a second poster (Le Page, 1978). Little did I know that, combined with the primitivity theorem (see full story in Le Page, 1992a), this superficially pointless classroom proof was the first quatrain of a lifelong saga that is still developing today at the rate of about one paper each three to five years. Applications are still bearing the most stunning fruits nearly every day.

The most pressing problems we had to tackle with diffractometer automation were recognition of the metric symmetry of the cell, and derivation of crystal symmetry and its subsequent use in efficient data collection. The popular cell-reduction algorithm at that time was based on distinguishing 44 mutually exclusive cases for the matrix of dot products between edges of the Niggli cell (Niggli, 1928). It is summarized in International Tables for X-ray Crystallography (1969), Vol. I, pp. 530-535. In addition to having generated an abundant literature of errata about conditions and of typos, the very basis of that approach was questionable to my eyes. As Niggli cell reduction requires knowledge of the lattice symmetry because it involves tests on equality, my feeling was that it is then logically circular to use the Niggli cell to determine lattice symmetry. Mathematically mutually exclusive cases may no longer be mutually exclusive when experimental error steps in, creating all sorts of problems having to do with pseudo-symmetrical lattices or the ordering of logical tests. Something more robust was needed.

The Chemistry Division was a couple thousand feet from CISTI, the then recent scientific library for Canada. Although collections were created in 1974, they included excellent original editions of Bravais, Mallard, Voigt, Friedel, Wyckoff, Niggli etc. that are quite difficult to find elsewhere. A pristine copy of Seeber (1831) even existed in a locked room reserved for rare books. I could then see that JDH had not exaggerated: the algebraic proof of the primitivity theorem sprawled there over about fifty pages.

After studying Bravais (1850) and dusting off the 19th century vocabulary, I came up with the conclusion that, with u and h, respectively, designating a direct and a reciprocal vector from a primitive lattice, the pair of conditions {u

  • h = 1 or 2; u×h = 0} was necessary and sufficient for lattice row [u] to be an even-order axis of metric symmetry. The only thing missing to transform this into a foolproof computer algorithm was a limit on the components of u and h. It can be proved that the magnitudes of the Miller indices of u and h cannot exceed 2 when referred to three shortest non-coplanar translations. Difficulties associated with experimental error were avoided: any set of three short translations could be used with no angular condition. Extension to detection of lattice pseudosymmetry was straightforward. Calling δ the angle between u and h, the case δ = 0 corresponds to symmetry, while the case δ < ε, where ε is a small limiting value, corresponds to pseudosymmetry because a small affine transformation can then create lattice symmetry from pseudosymmetry. The number of detected even-order axes is sufficient for crystal-system assignment, except for orthorhombic, which has three mutually perpendicular twofold symmetry axes, while rhombohedral has three coplanar ones, keeping complexity of branching to a very minimum. The lattice type is read off the values 1 or 2 of h
  • u for the metric symmetry axes. This became the CREDUC cell-reduction algorithm at the heart of NRCCAD, NRCVAX and the MDF checking software, and more recently CRYSTMET and Materials Toolkit. It has worked perfectly and never required any tweaking since the first day it implemented the necessary and sufficient pair of conditions above and identified one case in each crystal system. The work was presented at IUCr XII in Ottawa (Le Page, 1981) and published in Le Page (1982).

The next step was MISSYM, which is meant to identify the symmetry of a structure model within a given distance tolerance. It is difficult to realize the significance of MISSYM for crystallography, now that the dust around R. E. (Dick) Marsh's campaign in the 1980s has mostly settled. Dick has the incredible talent to 'see' symmetry upon mere inspection of atom coordinates. He was very thorough in his re-analyses, which involved re-typing deposited structure factors, as they were in printout form at the time. Some of his re-analyses are crystallographic gems, demonstrating an extraordinary crystal-chemical sense. Dick's intentions were to raise the level of awareness and the crystallographic culture of Acta C contributors, or at least its editorial team. Results were not entirely up to expectations. Years after initially beating the drum about the matter, awareness had risen to 100%, but Dick's batting average remained unchanged all along at about one 'marshed' structure per Acta C issue. In spite of scientifically impeccable work and laudable intentions, Dick Marsh's campaign had the unintended adverse effect of creating waves across the whole body of science that were starting to bring the science of crystallography into disrepute. As crystal symmetry must re-establish the lattice within a fraction of a lattice translation, the rotation part R of a crystal-symmetry generator is therefore a lattice-symmetry operation. The CREDUC algorithm spells out Miller indices for the directions of the elements of metric symmetry in the reference system of the three shortest translations. All numerical expressions for R are then known in Cartesian axes. Extension of CREDUC to the determination of the symmetry of a model then only involves solving the equation x' = R

  • x + T for T on one pair of atoms with same nature and known Cartesian coordinates x and x'. Checking that those values of R and T transform each atom in the list into an atom with the same nature and also in the list within the distance tolerance then establishes the existence of symmetry in the structure model. This is the essence of the MISSYM algorithm, presented at IUCr XIV in Perth (Le Page, 1987a) and published as Le Page (1987b), and of its MISSYM 1.1 version (Le Page, 1988), where defaults were tailored in the light of the large number of cases exposed by Marsh up to that date. Applied widely to past Acta C issues, MISSYM 1.1 flagged from defaults all structures that had been previously marshed, as well as a few genuinely pseudosymmetrical structures, but nothing else, as presented at IUCr XV in Bordeaux (Le Page, 1990). NRC gave the IUCr a licence for the use of MISSYM for its own not-for-profit purposes. Brian McMahon inserted MISSYM in the IUCr checking package in the fall of 1989 (Dacombe & McMahon, 1990). Overnight, marshable structures became an essentially extinct species in IUCr journals. Dick Marsh refocused his campaign on chemistry journals with about the same success, while things went back to business as usual at Acta C and MISSYM went on with its own career as a filter in crystal structure databases (Calvert, 1992; White, Rodgers & Le Page, 2002).

The CREDUC algorithm was again key to the interpretation of convergent-beam electron-diffraction (CBED) patterns for cell volumes (Le Page & Downham, 1991) or least-squares cell data (Le Page, 1992b). These concepts and developments were applied to rapid phase analysis in electron microscopy, and presented at IUCr XVI in Beijing (Le Page, Chenite & Rodgers, 1993).

It has been well known since Mallard (1885) that twinning is due to metric symmetry or pseudosymmetry of a multiple cell, and characterized by its twin law with small obliquity and small twin index. Although Cesaro (1886) dabbled with the problem, more than a century later no software existed that would be capable of spelling out all possible twin laws within maximum index and maximum obliquity for a given material. The main change required to adapt the CREDUC algorithm to the prediction of binary twins was then to relax the limit on the dot product condition and the limit on Miller indices to a common integer 2n value. If the dot product for a solution is p, the twin index is either p or p/2, depending on twin-lattice centering. The value of δ is the twin obliquity, while that of ε is the maximum obliquity. The corresponding program called OBLIQUE was presented at IUCr XVIII in Glasgow (Le Page, 1999) and published as Le Page (2002). It has since been spelling out possible binary twin laws within maximum obliquity and maximum index without missing one or proposing a wrong one, again because it is based on theorems. This is a big help for the identification of twin laws from single-crystal diffraction patterns for all organic, inorganic and, recently, macromolecular materials.

Le Page, Klug & Tse (1996a), presented at IUCr XVII in Seattle and published as Le Page, Klug & Tse (1996b), describes a step-by-step manual procedure to use MISSYM to derive conventional crystallographic descriptions from the P1 models in primitive axes used by ab initio DFT quantum modeling. This was again a timely contribution, as quantum modeling was becoming feasible with the expensive supercomputers that had recently sprouted around the planet. By that time, the performance of inexpensive off-the-shelf PCs was already within one to two orders of magnitude of what was needed to perform quantum computations on real systems. As an order of magnitude corresponds to five years in Moore's law terms, it became clear that a spectacular rampup in the use of quantum software was to be anticipated for shortly after Y2K. Anybody who dabbled with quantum software knows how tedious and time-consuming the creation of the model and its input files can be, as well as the interpretation of the output files. It could then be foreseen that by around 2005, the power of even a modest computing setup would exceed the data creation and interpretation capability of an individual, thus creating a bottleneck. Exactly like Eric Gabe, Allen Larson, Yu Wang, Peter White and myself had created in the 1970s the NRCCAD and NRCVAX software packages that automate to a great degree the work of the inorganic structural crystallographer, I similarly set up in 1998 with Paul Saxe from Materials Design Inc. to automate to a very significant extent the job of the quantum modeler in a first package called MedeA. We first created and automated the least-squares symmetry-general calculation of the elastic tensor from total energy (Le Page & Saxe, 2001) and from stress calculations (Le Page & Saxe, 2002). At the heart of this automation is the programming of the step-by-step procedure described in Le Page, Klug & Tse (1996b). The work was submitted to the XIXth IUCr Congress in Geneva (Le Page, Saxe & Rodgers, 2002a) and printed as Le Page, Saxe & Rodgers (2002b). The next implementation, called Materials Toolkit, with Innovative Materials Technologies Inc. (Le Page & Rodgers, 2005) is much more versatile and includes powerful extensions beyond the capabilities described in Le Page, Saxe & Rodgers (2002b). Its achievements include exploratory computation of the thermomechanical properties of existing or prospective materials by the thousand, contributions to seismology, permanent storage of toxic or radioactive elements, correction of experimental errors in published elastic tensors for reference materials, design of a coating for turbine blades in jet engines that increases their resistance to erosion by nearly an order of magnitude, now certified for commercial flights and commercialized, etc.

What am I doing now? Mostly three things. It is quite common nowadays that experimental data alone are too scant to allow deductive scientific conclusions. I actively seek such bogged-down studies within ICPET. Complementing the study with quantum modeling often allows definite conclusions to be drawn by giving unambiguous support to a model, even in the absence of a competing one. This is the first thing. The second thing that I do is introduce young crystallographers around me to the automated application of quantum methods as in Mercier & Le Page (2008). The combined result of the first two items is enthralling joint publications with my ICPET and IRC crystallographer colleagues that get noticed internationally (see Acta B highlights in IUCr Newsletter, fall 2005 and spring 2007). They also get noticed at NRC, as shown in Fig. 1, where the team of ICPET and IRC crystallographers receives a much coveted NRC award for Research Excellence. This also establishes factually that Materials Toolkit is an extremely powerful and versatile package, at the cutting edge of both structural science and materials science. The third thing I do is expand the range of automated applications in Materials Toolkit (see Le Page, 2006) while getting methods and results published. The latest such study has been the precise quantum calculation of surface tension on crystal faces for metals, currently being refereed.

When looking backward and extrapolating forward, I am happy to see that crystallography has constantly remained at the cutting edge of knowledge and technology since 1850. Its activities are surfing from one wave to another, gaining momentum each time through innovation and greater automation of complex repetitive tasks. From what I can see, this is not going to slow down soon, as quantum modeling of materials, a branch of modern crystallography, is currently undergoing a phase of explosive expansion in its capabilities and volume of output. This comes from greater automation harnessing the exponential increase of available computing power. This expansion will ultimately be a success only if the software that automates it rests on theorems and not on ad hoc considerations suffering from particular cases and exceptions.

Yvon Le Page

References


Bravais, A. (1850). J. Ec. Polytech. 19(33), 1-128.
Calvert, L. D. (1992). Acta Crystallogr. B48, 113-114.
Cesaro, G. (1886). Bull. Soc. Fr. Min. 9, 222-242.
Dacombe, M. H. & McMahon, B. (1990). Acta Crystallogr. A46, p. C-454, Abstract MS-15.02.03.
Donnay, J. D. H. (1962). pp. 564-569 in Fifty years of X-ray diffraction. Edited by P. P. Ewald. Also available as: http://www.iucr.org/iucr-top/publ/50YearsOfXrayDiffraction/index.html
Le Page, Y. (1978). Acta Crystallogr. A34, p. S-389, Abstract 18-2-8.
Le Page, Y. (1981). Acta Crystallogr. A37, p. C-338, Abstract 18-1-02.
Le Page, Y. (1982). J. Appl. Cryst. 15, 255-259.
Le Page, Y. (1987a). Acta Crystallogr. A43, p. C-293, Abstract 18-1-2.
Le Page, Y. (1987b). J. Appl. Cryst. 20, 264-269.
Le Page, Y. (1988). J. Appl. Cryst. 21, 983-984.
Le Page, Y. (1990). Acta Crystallogr. A46, p. C-454, Abstract 15-02-03.
Le Page, Y. (1992a). J. Appl. Cryst. 25, 661-662.
Le Page, Y. (1992b). Microsc. Res. 21, 158-165.
Le Page, Y. (1994). ACA Newsletter, Winter 1994, pp. 14-15.
Le Page, Y. (1999). XVIIIth Meeting of the IUCr in Glasgow. Abstract book, p.186, Abstract M12-CC.001.
Le Page, Y. (2002). J. Appl. Cryst. 35, 175-181.
Le Page, Y. (2006). MRS Bulletin, 31, 981-984 (2006).
Le Page, Y., Chenite, A. & Rodgers, J. R. (1993). Acta Crystallogr. A49, p. C59, Abstract PS-02-08-26.
Le Page, Y. & Downham, D. A. (1991). J. Electr. Microsc. Tech. 18, 437-439.
Le Page, Y., Klug, D. D. & Tse, J. S. (1996a). Acta Crystallogr. A54, p. C-91, Abstract MS03-06-02.
Le Page, Y., Klug, D. D. & Tse, J. S. (1996b). J. Appl. Cryst. 29, 503-508.
Le Page, Y. & Rodgers, J. R. (2005). J. Appl. Cryst. 38, 697-705.
Le Page, Y. & Saxe, P. W. (2001). Phys. Rev. B, 63, 174103.
Le Page, Y. & Saxe, P. W. (2002). Phys. Rev. B, 65, 104104.
Le Page, Y., Saxe, P. W. & Rodgers, J. R. (2002a). Acta Crystallogr. A58, p.C215.
Le Page, Y., Saxe, P. W. & Rodgers, J. R. (2002b). Acta Crystallogr. B58, 349-357.
Mallard, F. E. (1885). Bull. Soc. Fr. Min. 8, 452-469.
Martin, R. F. (1989). Amer. Mineral. 74, 491-493.
Mercier, P. H. J. & Le Page, Y. (2008). Acta Crystallogr. B64, 131-143.
Niggli, P. (1928). Krystallographische und strukturtheoretische Grundbegriffe. Handbuch der Experimentalphysik, Vol. 7, Teil 1, pp. 108-176. Leipzig: Akademische Verlagsgesellschaft.
Seeber, L. A. (1831). Untersuchungen über die Eingenschaften der positiven ternären quadratischen Formen. Freiburg.
White, P. S., Rodgers, J. R. & Le Page, Y. (2002). Acta Cryst. B58, 343-348.

Stanley C. Nyburg

[Stanley C. Nyburg] Stanley C. Nyburg

I was born in London, UK, in 1924. In 1939 at the outbreak of World War 2, my school was evacuated to Weymouth on the south coast. Whilst there in May, we experienced the dreadful evacuation of troops (mainly French) from Dunkirk, whom we helped to get fed and accommodated. In 1939 I took my matriculation examinations. We were examined on The Merchant of Venice during a heavy air-raid and (almost certainly illegally) were not sent to an air-raid shelter. We enjoyed the bombardment greatly. Oil tanks in the harbour were struck and the sky was so darkened we had to finish with all the lights on. I passed all the exams.

By 1940 bombing was so severe we all had to return briefly to London. From there we were re-evacuated to Winchester. Here I studied for university entrance exams. I was granted a university scholarship to read for a BSc in engineering but did not accept. J. Lyons & Co. asked me to work in their labs for them. I enrolled as a part-time university student at Birkbeck College (then in Fetter Lane) to read for an honours degree in chemistry with physics subsidiary. Air raids over London were frequent and perilous and classes at Birkbeck were moved from evenings to weekends. After one particularly intense air raid we had to sweep our lecture seats clean. The lecturer in Physics, having filled the blackboard, slid it to one side, revealing a gaping hole (much of the external wall had been blown away), and there in all its glory was a view of St Paul's Cathedral.

In October 1944, I was accepted by King's College, London, for one year to read Hons BSc Chemistry. Prof. G. M. Bennett was Head of Department and lectured on Physical Methods. He dealt briefly with X-ray crystallography, already a powerful structural tool. He warned us not to get too heavily involved, a subject 'clearly beyond most of you'. Prof. Bennett found me an opening as crystallographic trainee at the British Rubber Producers' Research Association (BRPRA) in Welwyn Garden City. (I did mention his earlier remarks about crystallography being 'difficult' but he laughed it off.) BRPRA was a recognised Institution of London University.

I here met George Jeffrey ('Jeff') who was to be my supervisor, and also Andrew Booth (q.v.). I started X-ray crystallography with primitive high-tension equipment on which I nearly killed myself. In November, E. G. Cox (later Sir) was appointed to a Chair in Chemistry at Leeds University and asked Jeff to join him as Lecturer. Accordingly I went in November 1945 to live in Leeds and read for a PhD there. (My brief sojourn at BRPRA allowed me to be a humble co-author on my first paper, not published until 1948) (1).

Under Prof. Cox's leadership there grew up a very effective X-ray crystallographic group. It was one of the first to semi-automate the summation of Fourier series. Hollerith cards were punched to correspond with Beevers-Lipson strips and these were summed on a card-reading machine used for accounting at the local electricity company (2). After a considerable struggle, I managed, by photographic methods, to solve the crystal structure of an organic compound. The results were submitted for a Leeds PhD granted in 1949 (3).

[Structure of rubber, 1954] From the 1954 published structure of rubber.

In 1949, I married and moved to St Albans. I obtained an Assistant Lectureship at the new University College of N. Staffordshire at Keele, to where we moved in 1952. Here I solved the natural rubber structure in 1954 (4). I had started this work before at the BRPRA, where I stretched a wide sheet of natural rubber on a frame and put it in a domestic freezer. Released from the frame the frozen rubber retained its shape. With suitably cold scissors, a small fragment of frozen rubber was cut out. A skilful glass blower made a Dewar container, the inner chamber being connected to the outside by a glass spiral tube. A hypodermic was affixed to the outside and when filled with liquid air the Dewar provided a continuous fine stream of very cold air. The rubber sample was mounted in this stream in a collimated beam of X-rays. Excellent diagrams were obtained at 30 deg rotational intervals and all intensities estimated by eye. The Bragg intensities can be well explained if the crystal structure is taken to be disordered. The isoprene units are planar, as required, but can occupy one of two possible positions. This structure has been widely accepted to be true.

[Aspidospermine] The correct molecular connectivity of aspidospermine, as determined by crystallographic methods in the late 1950s.

At Keele, a member of staff, Dr G. F. Smith, asked if we could solve the structure of aspidospermine, first studied in 1914 and the subject of chemical study since 1947. It was then a member of that increasingly large body of natural products whose molecular structures had eluded unambiguous determination by degradative methods. The methobromide proved to have the bromide ion unfavourably placed, but the methiodide also made by Dr Smith proved to be soluble by the heavy-atom method. Our analysis showed that none of the then proposed structures was correct (5,6).

We had no X-ray diffractometric equipment at Keele. We built our own X-ray generator, determined Bragg intensities photographically and determined a number of crystal structures. Here I wrote and published my monograph on structure analysis (7).

In 1958, G. A. Jeffrey had moved to the University of Pittsburgh to set up a Department of Crystallography. In 1962 he invited me and my family to go to Pittsburgh on a Fulbright Fellowship. Here I started my investigations into how crystalline Cl2 came to have its extraordinary herring-bone structure.

[Nitrogen overlap in a ruthenium complex] Overbutting of two nitrogen molecules in a ruthenium complex.

In 1963 we visited the University of Toronto and the Head of Chemistry offered me the post of Full Professorship. I accepted and we all had to return to England for one year to satisfy Fulbright conditions. We all went permanently to Toronto in 1964.

In the new Department of Chemistry at Toronto I was given liberal office and lab space and substantial funds with which to get started. Automatic diffractometers were becoming greatly in demand and the manufacturers spared no efforts to get their products bought. In the end I decided on the four-circle Picker machine. This proved a good choice, the machine being operative for more than forty years. During the 23 or so years in Toronto the Picker had a variety of computers and devices for its full automation. We used the NRCVAX system of structure determination written by Eric Gabe and collaborators at the National Research Council Laboratories in Ottawa. We provided a structure-solving service for the Department and were engaged in other research activities. Our most exciting determination came early on, namely the discovery by A. D. Allen in 1965 of a ruthenium complex containing molecular nitrogen as ligand. Traditionally it had always been considered that molecular nitrogen was too inert to form chemical compounds. This work clearly damaged that tradition (8).

From a study of the Cambridge Organic Crystal Database, we made scatter plots of non-bonded distances between identical atomic elements. We published the results later, showing that for the halogens especially the effective van der Waals shapes are not truly spherical but flattened. (9)

In 1974, the program BMFIT was written to give the closest match between molecules having some structural features in common. (10)

We also collaborated on crystallographic matters with the Department of Pathology at Mt Sinai Hospital in Toronto (11).

[Electron-density map] y = 0 electron-density map of β-C24,C26, showing decreasing C-atom site occupancies towards the end of the C-atom chains.

During the 70s we were also approached by Esso to pursue crystal studies of normal alkanes. This interest has lasted ever since. Our first entry into these new studies was to discover that the published crystal structure of n-octadecane was wrong. This we corrected. We obtained some exciting results from our alkane studies. Mineral oils contain largely normal alkanes of many molecular lengths, and when cooled this oil deposits waxes which greatly handicap the extraction of the oil. Despite enormous research effort by the oil companies, the crystalline nature of these waxes was not known. We decided to examine a simple binary mixture of alkanes as a simple model of a wax. The C20:C22 phase diagram was examined by our Australian colleagues. It is quite complex and shows there are certainly new phases in the 50%:50% region. We obtained excellent crystals from such a 50%:50% mixture dissolved in dodecane. Weissenberg photographs were taken with the crystal cooled to 10°C. From these we inferred that the space group was orthorhombic, Bb21m, with a = 4.99, b = 7.47 and c = 56.26 Å, the two pure components being triclinic. We managed to find the crystal structure. Either of the two alkane molecules can occupy the same position, their combined symmetry being a mirror normal to the z axis, a symmetry element which neither alkane possesses. This fascinating structure forms the basis of the alkane wax structures. At room temperature a disordered F phase is present. Later, a diffractometric study was made at King's College, after we had returned to UK, of the binary pair n-docosane:n-tetracosane. The phase diagram is similar but is everywhere higher in temperature. A diffractometric study was made of the 50%:50% crystal. This confirmed our earlier results. A truly remarkable crystal structure containing molecules with twenty-four and twenty-six carbon atoms which shows twenty-seven Fourier peaks! (12).

In 1987 it was decided that, since so much crystal structure service work was being carried out, the Department of Chemistry needed a more efficient diffractometer than the Picker. Also at that time my wife and I felt it would be a good time to return to the UK and live closer to our elder daughter and grandsons. The Picker was deemed surplus to requirements. I negotiated for an Honorary Senior Fellowship at King's College London and the Picker was sold to them for a few thousand dollars. Its delicate goniometric parts were covered in a slow-setting sheath of polystyrene by someone who had done similar work for Ford automobile engines. It was shipped (all 0.75 tons) over the Atlantic in a Russian freighter to London, UK.

Setting up the Picker at King's raised a number of problems, particularly the change from 115 V a.c. to 240 V a.c. However, in all this I was greatly helped by a staff member, Dr Adrian Parkins. The Picker was newly fitted to a PC, an IBM 286, and Gabe's Fortran program for data collection was rewritten in Gbasic. The Picker behaved excellently and Adrian and I completed a large number of crystal structures for staff members.

In the early 90s, King's acquired a Nonius CAD diffractometer. The Picker was subsequently devoted to further work with normal alkanes. Unfortunately, the Department of Chemistry at King's College London was closed down permanently by the College authorities in 2006.

I am now Honorary Senior Research Fellow at University College London, continuing normal alkane studies.

Stanley C. Nyburg

References

(1) G. A. Jeffrey, H. P. Koch & S. C. Nyburg, J. Chem. Soc. pp. 1118, (1948).
(2) E. G. Cox, Proc. Leeds Phil. Lit. Soc. 5, 1-13 (1947).
(3) D. W. J. Cruickshank, G. A. Jeffrey & S. C. Nyburg, Z. Kristallogr. 112, 385 (1959).
(4) S. C. Nyburg, Acta Crystallogr. 7, 385 (1954).
(5) J. F. D. Mills & S. C. Nyburg, Tetrahedron Lett. 11, 1-3 (1959).
(6) J. F. D. Mills & S. C. Nyburg, J. Chem. Soc. pp. 1485-1463 (1960).
(7) X-ray Analysis of Organic Structures, S. C. Nyburg. Academic Press, 1961.
(8) F. Bottomley & S. C. Nyburg, Acta Crystallogr. B24, 1289 (1968).
(9) S. C. Nyburg & C. H. Faerman, Acta Crystallogr. B41, 274-279 (1985).
(10) S. C. Nyburg, Acta Crystallogr. B30, 251 (1974).
(11) K. P. H. Pritzker, P.-T. Cheng, M. E. Adams & S. C. Nyburg, J. Rheum. 5, 469-473 (1978).
(12) A. R. Gerson & S. C. Nyburg, Acta Crystallogr. B50, 252-256 (1994).

I. David Brown

[I. D. Brown] I. David Brown

I studied for my bachelor's degrees in General Science and Honours Physics at King's College, London, UK, at the time when Rosalind Franklin and Maurice Wilkins were determining the structure of DNA. For graduate studies I moved to the Royal Institution (RI), where the group working with the director, Sir Lawrence Bragg, was unraveling the first crystal structure of a protein. For my PhD under the supervision of Jack Dunitz, I solved the crystal structures of two organic complexes of Cu(I), doing most of the calculations by hand, but experimenting with writing machine-language code for a computer with around a hundred and twenty memory locations which had to store both program and input. When Jack accepted an appointment at the ETH, I followed and spent my final PhD year in Zurich. In 1959, as was customary at the time, I crossed the Atlantic to take up a postdoctoral position at McMaster University with Howard Petch. My job was to finish building a single-crystal neutron diffractometer at the newly opened McMaster swimming-pool reactor. During this time I developed an interest in the structure of inorganic compounds, a term which I use to include any non-metallic crystal that contains no C-H bonds. This was an area much neglected except by mineralogists who were, however, focused on natural minerals. Solid-state physicists were not prepared to work with anything more complex than a cubic crystal, preferably containing only one kind of atom, while chemists thought of a crystal as a kind of freezer in which a dormant compound could be indefinitely stored until it was needed to carry out some real chemistry in solution. Those who called themselves 'inorganic chemists' were more interested in preparing organic molecules that could bind to a transition metal atom. The neglect of inorganic solid-state chemistry arose in part from the lack of an effective model for the systematic description of infinite structures. Most descriptions were based on an eclectic mixture of words such as 'packing of spheres', 'ionic interactions', 'covalent bonds', 'space group symmetry',' polyhedral packing' and 'structure type'. Unlike the chemical bond descriptions used in organic chemistry, descriptions of inorganic structure tended to be vague and unconvincing.

In 1960, I was joined at McMaster by Chris Calvo, who in his short life published a series of high-quality structures of phosphates that still compare favourably with structures published today. We set up a small X-ray laboratory with a generator and a precession camera, where we were later joined by Colin Lock in Chemistry and Doug Grundy in Geology. Subsequently, this laboratory was expanded and provided structure determinations for other faculty members, while students had the opportunity to learn how to determine crystal structures. Today this laboratory is managed by Jim Britten, and is equipped with the latest X-ray diffractometers and software.

After my postdoctoral years I joined the McMaster Physics Department, where I spent my first ten years wandering in my own scientific wilderness. Although I gained experience solving structures for my chemistry colleagues I could not see where my research was going. As many can corroborate, it is difficult in the wilderness to know what one is looking for, or even if there is an answer to the question that has yet to be discovered. When Gai Donnay came to McMaster to show how Pauling's electrostatic valence model could be improved by taking account of the correlation between bond valence and bond length, I failed to pick up on the clues. My epiphany came a couple of years later in 1971, when Bob Shannon arrived at McMaster on a year's leave from duPont. Within an hour of our first meeting he had convinced me of the importance of Donnay and Allmann's work. The rest of that year we spent extending and simplifying their approach. In our paper we showed how bond valences could be calculated from a wide range of experimentally observed bond lengths, how they are normalized by arranging that they sum to the valence (oxidation state) of each atom, how they can be used to check the validity of newly determined structures, and how they provide a quantitative measure of the strength of a bond that, unlike the bond length, is independent of the nature of the atoms involved.

At the end of his stay, Bob Shannon left me six boxes of computer cards on which he had laboriously punched the unit cells, symmetry operators and atomic coordinates of over four hundred inorganic crystals, but this database was useless because there was no way to retrieve the information it contained. The experience made me realize the importance of creating a well-structured machine-readable database if I wanted to carry out systematic studies. A large part of my subsequent career has been devoted to simplifying crystallographic data retrieval, first by creating an annual bibliography of inorganic crystal structures (BIDICS 1969-1981), and later proposing a common file structure to allow the interchange of crystal structure databases between programs and laboratories (this has now evolved into CIF). At the same time, Guenter Bergerhoff and I started the Inorganic Crystal Structure Database (ICSD). By 1985 the ICSD had reached the point where Daniel Altermatt and I were able to use it to prepare a systematic set of bond-valence parameters.

Subsequently, I expanded the bond-valence model to show how it can be used in structure modeling of both solids and liquids, how it predicts chemical stability and reactivity including aqueous solubility, and how the bonding geometry can be analyzed into separate contributions from chemical bonding, steric strain and electronic anisotropies. An invitation from Henk Schenk to present a series of lectures in Amsterdam in 1994 led to the publication in 2002 of my book 'The Chemical Bond in Inorganic Chemistry' (OUP), which brings all these threads together.

In 1986 I acted as local chair for the ACA meeting held at McMaster, the last ACA meeting held on a university campus. Subsequently, I persuaded the ACA to establish a Canadian Division and I served as its first representative on the ACA Executive, an experience which convinced me of the importance of the ACA in bringing together North American crystallographers.

My students and academic colleagues will probably remember most affectionately the daily morning coffee breaks when my group would meet together informally. We discussed many topics on these occasions, including the problems of structural chemistry, sometimes focusing on the particular problem of an individual, sometimes raising more general questions. On these occasions we would let our imaginations run wild, but always challenged each other to test and justify each new idea. These gatherings were the forge in which the bond-valence model was hammered out.

I. David Brown

A. C. Larson in Canada

[Allen Larson] Allen C. Larson.

I had joined the Los Alamos Scientific Laboratory (LASL) in 1956 after graduating from Washington University with a PhD. I worked with Don Cromer and Brad Roof studying the structure of alloys of plutonium. One of my principle activities was developing software for determining and refining the crystal structures of these phases. I quickly established myself as an excellent software developer using the LASL-developed Madcap language on the MANIAC (a LASL-developed computer), and very soon after that Fortran on the IBM computers at LASL. In 1966, I was elected to the Computing Committee of the American Crystallographic Association and made a member of the IUCr Computing Committee, and I chaired the Committee from 1975 to 1978. Then I was a consultant to the committee again until 1981, a total of twelve years with the IUCr Computing Committee.

We noted that many of the alloy structures we were finding were similar to already known structures. In an effort to enable us to solve the structure of the new phases which our metallurgists were creating, we decided that developing a computer-based data set of the known structures was necessary. In the summer of 1960 we had a summer Graduate Assistant, Joe Finny, search the literature and enter the details of known metal and alloy structures into our data file.

In the summer of 1973, Los Alamos Scientific Laboratory was having a funding crisis and needed to reduce its staff. They assembled a list of people to place on the RIF (Reduction In Force) list. Unfortunately for me, I was placed on that list. I did not want to abandon crystallography, as they insisted I would have to if I were to take an alternate position within the laboratory, so I opted to accept the RIF pay and leave the laboratory and moved with my family to Austin, Texas, where my wife had enrolled in the Law School at the University of Texas.

[Larry Calvert and Eric Gabe] Larry Calvert (left) and Eric Gabe (right).

I contacted several people around the US and Canada in the weeks following receipt of the RIF notice. One important person on that list was Dr W. B. (Bill) Pearson, who was at NRC in Ottawa. One of my concerns was the metals data file that Dr Don Cromer and I had started to construct at Los Alamos. We felt that that project would be lost after I left Los Alamos. I asked Dr Pearson if there was anything I could do to find a new home for it. He invited me to bring it to NRC, where Dr Larry Calvert, who was doing a lot of work on the IUCr Structure Reports metals data, accepted responsibility for it. I flew to Ottawa with the metals data file and with the software that we had developed to access the file on a magnetic tape. Dr Calvert and Dr Gabe had a DEC PDP-8, which we used to further develop the data file and its software. This machine had been greatly enhanced from the 4096 12-bit word PDP-8 that I had been using in Los Alamos for diffractometer control.

After completing the transfer of the file, Calvert and Gabe asked me to install MULTAN on the PDP-8. I had worked on doing that on a small computer for Syntex in Cupertino late in 1974 and agreed to this new task. And after we finished that, it was agreed that I should install other portions of the Los Alamos Crystal Structure package on the PDP-8. This included the space group symbol-interpreting software that I had developed on sabbatical year in Cambridge and Los Alamos. However, since I had installed that package on the Syntex hardware, we decided that perhaps it would be best if I wrote a new program. Thoughts about licensing drove us to this decision. The accuracy of the new program was checked by comparing its output with that of the original program, which had very carefully been checked manually against the International Tables for X-ray Crystallography, 1952. The new code uses matrices and vectors to develop the groups, where the older code had developed its operations by scanning a list of binary numbers that I had developed. The new code was carefully documented internally, but the older code was not nearly as well documented internally. This new code is the one that is used in the GSAS package today.

In the summer of 1978, Eric Gabe and I presented the NRCC software package at the IUCr Computing School in Enschede, The Netherlands. I was partially funded by the IUCr on this trip, which included the IUCr Meeting in Warsaw, Poland.

[Allen Larson] Allen Larson in a style of clothing more typical of Canada (circa 1981).

My last major stay in Ottawa was from 15 November 1980 to 15 February 1981. On this trip, Eric Gabe and I started to develop a powder data refinement capability into the software package. I was back in June 1981 for the IUCr meeting that year, now funded by Los Alamos National Laboratory that had rehired me on 1 June 1981.

In the seven years that I was self-employed I also spent two months at the University of Calgary working with Dr K. Ann Kerr, again installing and developing crystallographic software. This was in two separate month-long stays, the first in June 1975, the second in March 1976.

My duties on returning the Los Alamos were to support the diffraction instruments at LANCE, the Los Alamos Neutron Scattering Center. Initially I was to support a single-crystal instrument, but since they wanted to develop a powder instrument as well was asked to help develop software to analyze its data as well. Prof. Robert Von Dreele at ASU was one of the people involved with developing the powder diffraction capability and he assisted me in expanding the capability of the Los Alamos crystal structure software to be able to refine structures against powder data.

One of the criteria that I always use in developing software is to keep it open to the addition of new data sources and new output products. With this in mind, Bob and I continued the process of inserting powder data refinement into the Los Alamos Crystal Structure package. I had been thinking of a name for our software system and came up with 'Generalized Structure Analysis System'. After a bit of thought we decided that we should drop the 'ized' in that name and thus the 'General Structure Analysis System', GSAS, came into being.

Allen C. Larson

An interesting interlude with pyrolytic graphite

In 1972, after a brief visit to New Zealand, Larry Calvert and his colleague, Eric Gabe, called in at the (then) Chemical Physics Division of CSIRO in Melbourne. Discussion with the Chief of the Division, Dr A. L. G. Rees, led to Larry coming to spend an extended spell with us in 1973-1974.

At that time, I was interested in certain aspects of extinction of an experimental nature, rather than the more usual theoretical concerns. Originally, the subject had dealt with the shape of single-crystal diffraction peaks (ref. 1). Since most single-crystal X-ray peaks are too narrow to handle experimentally, my attention had been directed to pyrolytic graphite, of which the 000l peaks were of a more feasible magnitude for experimental observations.

Joining us in these investigations was Reg Killean (Dr R. C. G. Killean, School of Physical Sciences, University of St Andrews, Scotland). One aim was to investigate whether the level of polarization changes across a diffraction peak. A source of polarized X-rays of adequate intensity was needed. It turned out that graphite 0006 could be quite successfully used with Cu Kα1 (ref. 2). The basic arrangement for this experiment involved a Picker diffractometer with a pyrolytic graphite crystal set to provide the polarized beam. This beam of polarized monochromatic radiation passed through a hollow shaft constituting the collimator of a second small diffractometer (ref. 3) with the second pg crystal (the analyser). Mounted on the shaft was the detector arm, which could rotate about the shaft. One could therefore take readings of intensity at 0, 90, 180 and 270° and deduce the polarization ratio at each angular setting of the specimen crystal at specific 2θ settings. The four readings allowed for internal checks. Thus, due to physical symmetry, readings at 90 and 270° should be equal.

This allowed a complete study of the change in polarization of the 0002 reflection of pyrolytic graphite (a ZYA specimen). This procedure allows for accurate average values of polarization ratios for any crystal monochromator system. A further experimental study was possible using the polarized monochromatic beam and the small diffractometer. This was to investigate the interaction with a turbostratic structure. For this purpose, the polarized beam is passed along a hollow shaft which constitutes the inlet collimator to the small diffractometer. Also attached to the shaft is the detector unit with the second (specimen) crystal adjustment. The intensity for each setting of the specimen crystal is determined and can be converted to an estimate of absorption. A full account is given in ref. 5.

From the material studied in this last work, it was possible to obtain an estimate of the X-ray attenuation coefficient of carbon for Cu Kα1 radiation given in ref. 6. Larry was an enthusiastic and stimulating colleague and the three of us worked well together. The collaboration was both enjoyable and fruitful. The work carried out then has developed over the years and has led to a modified viewpoint on extinction.

Sandy Mathieson

References

(1) G. C. Darwin, Philos. Mag. 43, 800-829 (1922).
(2) L. D. Calvert, R. C. G. Killean & A. McL. Mathieson, X-ray polarization with a pyrolytic graphite crystal. J. Appl. Crystallogr. 7, 406 (1974a).
(3) A. McM. Mathieson, X-ray monochromator configurations and a monochrometer design for X-ray single-crystal diffractometers. Rev. Sci. Instrum. 39, 1834-1837. (1968).
(4) L. D. Calvert, R. C. G. Killean & A. McL. Mathieson, Polarization ratios of a pyrolytic graphite crystal for Cu Kα1 X-rays. In Diffraction Studies of Real Atoms and Real Crystals, pp. 88-89. Canberra: Australian Academy of Science (1974b).
(5) L. D. Calvert, R. C. G. Killean & A. McL. Mathieson, Transmitted-beam absorption from a turbostratic structure: pyrolytic graphite. Acta Crystallogr. A32, 648-652 (1976).
(6) L. D. Calvert, R. C. G. Killean & A. McL. Mathieson, X-ray attenuation coefficient of carbon for Cu Kα1 radiation. Acta Crystallogr. A31, 855-856 (1975).

Photographic record of crystallographic activities in Canada

The complete IUCr photographic archive includes thousands of photographs. Here we include a collection illustrating activities in this country. This image is selected randomly from the galleries listed below (ACA Annual Meeting, 2009).
Viivi Majava.